Biodom mini
frohlfing·biodom-mini·kicad/Biodom.kicad_pcb
About the Biodom mini PCB
Biodom mini is an open source ESP32 PCB design by frohlfing, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 160 × 99.1 mm, with 23 components from 23 distinct parts.
Its main chip is the ESP32, from the ESP32 family. By type, the board carries 16 connectors, 3 resistors, 1 IC, 1 LED and 1 capacitor.
From the project
Ein Hightech-Gewächshaus
Das Ziel ist ein Mini-Gewächshaus für anspruchsvolle Pflanzen, das automatisch für ein tropisches Klima sorgt.
- Künstliche Sonne - Konstante Temperatur - Konstante Luftfeuchtigkeit - Automatische Bewässerung - Kamera (schießt regelmäßig Bilder für Zeitraffer-Video) - Display (zeigt aktuelle Werte an) - Webinterface (über WLAN erreichbar)
Eine detailliertere technische Dokumentation befindet sich in Projektdokumentation.md.
Main components on the Biodom mini
Biodom mini bill of materials (BOM)
23 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 | ESP32_DevKitC_V2_Socket | U1 |
| 1 | Kamera | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Luft | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Bodentemperatur | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Bodenfeuchte | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Wasserstand | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Lichtstärke | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Reserve S6 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Relais | PinHeader_1x10_P2.54mm_Vertical | J8 |
| 1 | Display | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | DC | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J16 |
| 1 | PWR | PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | RST | PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | UART | PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | TDO | PinHeader_1x01_P2.54mm_Vertical | J26 |
| 1 | TDI | PinHeader_1x01_P2.54mm_Vertical | J27 |
| 1 | Spannungsteiler | XL4015_Module_Socket | P1 |
| 1 | SD-Karte | MicroSD_SPI_Modul_Socket | Z2 |
| 1 | LED | LED_D3.0mm | Z4 |
| 1 | 470µF | CP_Radial_Tantal_D10.5mm_P5.00mm | C1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4,7kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 330Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Biodom mini design files
The KiCad project lives in the frohlfing/biodom-mini repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Biodom.kicad_pcb
- Schematickicad/Biodom.kicad_sch
Biodom mini: common questions
What microcontroller does the Biodom mini use?
The Biodom mini is built around the ESP32, from the ESP32 family.
How big is the Biodom mini PCB?
The Biodom mini measures 160 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Biodom mini?
23 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Biodom mini design files?
From the frohlfing/biodom-mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Biodom mini design in my own project?
Yes, under the terms of its GPL-3.0 license, which frohlfing chose for the repository.
Can I test firmware for the Biodom mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k