31 open source boards using the ESP32

Real designs built with the ESP32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

31 boardsClear filters|Most starred

How designs wire the ESP32

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the ESP32 connects to, and the resistors, capacitors and other passives placed on it.

3V3pin 2, 16Connected to: Signal 38% · not connected 31% · 3.3V 24%
  • Capacitor to GND on 30% · 100 nF (3), 1 µF (2), 10 µF (1)

31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include L0 ESP32 by Luos-io, Marmota by inputlabs, ONLY ECG fix by tregatti-tech and ESP32N1 by whitecatboard.

The ESP32 in open source designs

The gallery holds 31 open source boards using the ESP32 from 24 GitHub repositories; a typical one measures about 99.5 × 73.5 mm and carries around 29 components.

74% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is L0 ESP32 by Luos-io.

Microcontrollers on boards using the ESP32

ESP32: common questions

Where can I find a ESP32 reference design?

Each of the 31 boards on this page is a real design using the ESP32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ESP32?

The AMS1117-5.0, TP4056, AMS1117-3.3, Flash and MAX98357A appear in the most repositories here.

Which microcontrollers do boards using the ESP32 use?

Most are built on ESP32 (29), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the ESP32?

The median is 99.5 × 73.5 mm, and 74% are two-layer designs.

What is the most popular open source board using the ESP32?

By GitHub stars, L0 ESP32 by Luos-io, with 547 stars.

Can I simulate one of these boards using the ESP32 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part