Z80fran v1
fsedano·z80fran_v1
About the Z80fran v1 PCB
Z80fran v1 is an open source PCB design by fsedano, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 15 components from 13 distinct parts.
Other key parts include the NE555P, Z80CPU and SST39SF010. By type, the board carries 5 capacitors, 4 resistors, 3 ICs, 1 connector, 1 switch and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
Nothing unusual or special. But I learnt coding on a ZX Spectrum back in 1981.. So now, older and wiser (?) why not recreating (yet another) Z80 computer just because?
Main components on the Z80fran v1
Z80fran v1 bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | Z80CPU | DIP-40_W15.24mm_Socket | U2 |
| 1 | SST39SF010 | DIP-32_W15.24mm | U3 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Horizontal | J1 |
| 1 | SW_Push | SW_E-Switch_EG1271_SPDT | SW1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 10n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 2 | 100nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4 |
| 2 | 10u | CP_Radial_D4.0mm_P2.00mm | C3, C5 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R4 |
Z80fran v1 design files
The KiCad project lives in the fsedano/z80fran_v1 repository on GitHub; these links point at the commit this page was built from.
- LayoutZ80_Demo1.kicad_pcb
- SchematicZ80_Demo1.kicad_sch
Z80fran v1: common questions
How big is the Z80fran v1 PCB?
The Z80fran v1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80fran v1?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Z80fran v1 design files?
From the fsedano/z80fran_v1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Z80fran v1 design in my own project?
The repository has no license, so all rights stay with fsedano. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k