Ch02-blinky

futureshocked·KLP-5e-Vol1-Projects·ch02-blinky/ch02-blinky.kicad_pcb

Ch02-blinky PCB layout, top view — open source board by futureshocked

About the Ch02-blinky PCB

Ch02-blinky is an open source PCB design by futureshocked, published on GitHub under the MIT license. It is a 2-layer board measuring 21.8 × 20.3 mm, with 8 components from 8 distinct parts.

Other key parts include the AP3015AKTR-G1. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

KiCad Like a Pro, 5th Edition, Volume 1: finished KiCad projects (555 blinker, breadboard PSU, solar PSU)

These are the finished KiCad projects from Volume 1, Getting Started: Your First PCBs, part of KiCad Like a Pro, 5th Edition by Peter Dalmaris. The book teaches by building, and this repository holds the result of each build, so you can open a working project, compare it against your own, or pick up where you got stuck.

1. Install KiCad 10 from . The projects were made with KiCad 10, and older versions may not open them. 2. Clone this repository, or download it as a ZIP with the green Code button. 3. In KiCad's project manager choose File, Open Project, and open the .kicadpro` file inside…

Main components on the Ch02-blinky

Ch02-blinky bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP3015AKTR-G1
NE555P
U1
1
CONN_01X02_PIN
Conn_01x02_Pin
J1
1
SS14
LED
D1
1
10 nF
C1
1
10 uF
C2
1
10 k
R1
1
47 k
R2
1
470
R3

Ch02-blinky design files

The KiCad project lives in the futureshocked/KLP-5e-Vol1-Projects repository on GitHub; these links point at the commit this page was built from.

Ch02-blinky: common questions

How big is the Ch02-blinky PCB?

The Ch02-blinky measures 21.8 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ch02-blinky?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ch02-blinky design files?

From the futureshocked/KLP-5e-Vol1-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ch02-blinky design in my own project?

Yes, under the terms of its MIT license, which futureshocked chose for the repository.

More boards in KLP-5e-Vol1-Projects

Similar boards