KASM ACTUATOR PCB REV2
gabeak2·KASM_ACTUATOR_PCB_REV2
About the KASM ACTUATOR PCB REV2
KASM ACTUATOR PCB REV2 is an open source STM32 PCB design by gabeak2, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 121 × 70.6 mm, with 247 components from 71 distinct parts.
Its main chip is the STM32H750VBTX, from the STM32 family. Other key parts include the TPS5430DDA, TPS54620, M24C02-WMN, 74LVC2G07 and STSPIN240. By type, the board carries 96 resistors, 87 capacitors, 20 ICs, 19 test points, 9 diodes and 8 connectors.
From the project
PCBA to drive adaptive mirrors at Keck and UH88
A PCBA to drive voice coil actuators at Keck and University of Hawaii at Hilo. Work done as part of my MS ECE Thesis at Johns Hopkins. Please enjoy this beautiful glamor shot of my boards !
Main components on the KASM ACTUATOR PCB REV2
KASM ACTUATOR PCB REV2 bill of materials (BOM)
247 components, 71 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | TPS54620 | Texas_S-PVQFN-N14_ThermalVias | U2 |
| 1 | M24C02-WMN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32H750VBTX STM32H750VBTx | LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | 74LVC2G07 | SOT-23-6 | U6 |
| 13 | STSPIN240 | VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U8, U11, U12, U13, U14, U15, U16, U17 +5 |
| 2 | LDC1614 | WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U9, U10 |
| 1 | C2929399 24MHz, 9pF | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | Y1 |
| 2 | CONN_01X02 Conn_01x02 | Molex_KK-396_A-41792-0002_1x02_P3.96mm_Horizontal | J1, J2 |
| 2 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3, J5 |
| 1 | DB25_RECEPTACLE_MOUNTINGHOLES DB25_Receptacle_MountingHoles | TE_5747846-4 | J4 |
| 1 | CONN_01X06 Conn_01x06 | CONN_A-7478-06A_MOL | J6 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | 09564527612 | 09564527612 | J20 |
| 2 | SW_Push | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 5 | "GND" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP13, TP15, TP16, TP17 |
| 1 | "SCK6" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2 |
| 1 | "~{CS6}" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP3 |
| 1 | "MISO6" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4 |
| 1 | "1.8V" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP5 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | "MOSI6" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP6 |
| 1 | "SCK2" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7 |
| 1 | "~{CS2}" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP8 |
| 1 | "MISO2" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP9 |
| 1 | "MOSI2" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP10 |
| 1 | "RX4" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP11 |
| 1 | "3.3V" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP12 |
| 1 | "TX4" | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP14 |
| 1 | "SDA" | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP26 |
| 1 | "SCL" | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP27 |
| 1 | C191023 D_Schottky | D_SOD-323 | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 2 | LED_RED | LED_0603_1608Metric | D3, D4 |
| 2 | C965804 LED_GREEN | LED_0603_1608Metric | D5, D9 |
| 3 | C20613596 LED_WHITE | LED_0402_1005Metric | D6, D7, D8 |
| 2 | C1017 FerriteBead_Small | L_0805_2012Metric | FB1, FB2 |
| 1 | 56UH 56uH | L_Changjiang_FNR5020S | L1 |
| 1 | 6.8UH 6.8uH | L_Chilisin_BMRF00101040 | L2 |
| 1 | 100UH 100uH | L_0603_1608Metric | L3 |
| 14 | 10NF 10nF | C_0402_1005Metric | C1, C49, C52, C55, C61, C64, C67, C70 +6 |
| 9 | 10UF 10uF | C_1206_3216Metric | C2, C4, C5, C6, C10, C12, C13, C14 +1 |
| 30 | 100NF 100nF | C_0402_1005Metric | C3, C7, C11, C16, C17, C26, C27, C28 +22 |
| 2 | 220UF 220uF | CP_Elec_6.3x5.4 | C8, C9 |
| 5 | 100UF 100uF | C_1206_3216Metric | C18, C19, C20, C21, C22 |
| 1 | 2.2NF 2.2nF | C_0402_1005Metric | C23 |
| 1 | 150PF 150pF | C_0402_1005Metric | C24 |
| 1 | 82NF 82nF | C_0402_1005Metric | C25 |
| 4 | 4.7UF 4.7uF | C_0402_1005Metric | C32, C35, C43, C56 |
| 2 | 15PF 15pF | C_0402_1005Metric | C40, C41 |
| 1 | 1UF 1uF | C_0402_1005Metric | C42 |
| 2 | 2.2UF 2.2uF | C_0402_1005Metric | C44, C45 |
| 2 | 10UF 10uF | C_0805_2012Metric | C47, C58 |
| 13 | 22NF 22nF | C_0402_1005Metric | C50, C53, C59, C62, C65, C68, C71, C74 +5 |
| 2 | 100K 100k | R_0402_1005Metric | R1, R5 |
| 29 | 10K 10k | R_0402_1005Metric | R2, R10, R12, R36, R39, R41, R44, R46 +21 |
| 2 | 18K 18k | R_0402_1005Metric | R3, R8 |
| 1 | 5.9K 5.9k | R_0402_1005Metric | R4 |
| 5 | 4.7K 4.7k | R_0402_1005Metric | R6, R27, R28, R29, R34 |
| 1 | 12.4K 12.4k | R_0402_1005Metric | R7 |
| 1 | 240K 240k | R_0402_1005Metric | R9 |
| 1 | 3.01K 3.01k | R_0402_1005Metric | R11 |
| 1 | 10 | R_0402_1005Metric | R13 |
| 1 | 11K 11k | R_0402_1005Metric | R14 |
| 15 | 1k | R_0402_1005Metric | R15, R17, R38, R43, R48, R53, R58, R63 +7 |
| 1 | 442 | R_0402_1005Metric | R16 |
| 1 | 100 | R_0402_1005Metric | R18 |
| 5 | 220 | R_0402_1005Metric | R19, R20, R21, R23, R33 |
| 1 | 49.9 | R_0402_1005Metric | R22 |
| 2 | 0 | R_0402_1005Metric | R26, R31 |
| 1 | 2.2K 2.2k | R_0402_1005Metric | R32 |
| 26 | 330M 330m | R_0402_1005Metric | R35, R37, R40, R42, R45, R47, R50, R52 +18 |
KASM ACTUATOR PCB REV2 design files
The KiCad project lives in the gabeak2/KASM_ACTUATOR_PCB_REV2 repository on GitHub; these links point at the commit this page was built from.
KASM ACTUATOR PCB REV2: common questions
What microcontroller does the KASM ACTUATOR PCB REV2 use?
The KASM ACTUATOR PCB REV2 is built around the STM32H750VBTX, from the STM32 family.
How big is the KASM ACTUATOR PCB REV2?
The KASM ACTUATOR PCB REV2 measures 121 × 70.6 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the KASM ACTUATOR PCB REV2?
247 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KASM ACTUATOR PCB REV2 design files?
From the gabeak2/KASM_ACTUATOR_PCB_REV2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KASM ACTUATOR PCB REV2 design in my own project?
Yes, under the terms of its GPL-3.0 license, which gabeak2 chose for the repository.
Can I test firmware for the KASM ACTUATOR PCB REV2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k