20 open source boards using the 74LVC2G07
Real designs built with the 74LVC2G07, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
2019-07-06 11:52:16 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031AVI1861
dmadole
29.9 × 17.2 mm9 parts2LGPL-2.015Tia fpga
lrrosa
61.6 × 34.5 mm24 parts2LCERN-OHL-S-2.02Replicookie
cmcquinn
184.2 × 127 mm173 parts6LCERN-OHL-S-2.01STM32
ICE-EngineControlUnit
ASURacingTeam
100 × 100 mm295 parts2LNo license0STM32
KASM ACTUATOR PCB REV2
gabeak2
121 × 70.6 mm247 parts6LGPL-3.00STM32
IMU
abstractfoundry
17.4 × 25 mm24 parts2LNo license0FPGA
2019-07-06 12:26:53 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031Mariner 1-A
BroncoSpace-Lab
100 × 100 mm235 parts6LNo license6STM32
THP
abstractfoundry
17.4 × 25 mm20 parts2LNo license0FPGA
2019-07-06 12:29:23 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:08 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:09 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:15:58 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:00 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:20 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:07:42 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:08:38 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:25:46 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
Fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031
How designs wire the 74LVC2G07
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74LVC2G07 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: The microcontroller 38% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 3.3V 100% |
|
| 1Ypin 6 | Connected to: A connector 38% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2019-07-06 11:52:16 fpga hat by Wren6991, AVI1861 by dmadole, Mariner 1-A by BroncoSpace-Lab and Tia fpga by lrrosa.
The 74LVC2G07 in open source designs
The gallery holds 20 open source boards using the 74LVC2G07 from 8 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 87 components.
75% use four copper layers or more, and 80% carry an open source license.
The most starred is 2019-07-07 18:08:38 fpga hat by Wren6991.
Parts used alongside the 74LVC2G07
What boards using the 74LVC2G07 are built for
74LVC2G07: common questions
Where can I find a 74LVC2G07 reference design?
Each of the 20 boards on this page is a real design using the 74LVC2G07. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC2G07 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the 74LVC2G07.
Which microcontrollers do boards using the 74LVC2G07 use?
Most are built on FPGA (12) and STM32 (4).
How big is a typical board using the 74LVC2G07?
The median is 65 × 56.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the 74LVC2G07?
By GitHub stars, 2019-07-07 18:08:38 fpga hat by Wren6991, with 31 stars.
Can I simulate one of these boards using the 74LVC2G07 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.