Kurc f405
ganymede451·kurc-f405·hardware/kurc_f405.kicad_pcb
About the Kurc f405 PCB
Kurc f405 is an open source STM32 PCB design by ganymede451, published on GitHub. It is a 4-layer board measuring 39.9 × 39.9 mm, with 78 components from 46 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the TPS54360DDAR, AP2112K-3.3TRG1, USBLC6-2SC6 and BMI270. By type, the board carries 30 capacitors, 21 resistors, 11 connectors, 5 ICs, 5 diodes and 3 inductors.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
40x40 mm 4-layer STM32F405 Betaflight flight controller (KiCad)
A 40×40 mm, 4-layer STM32F405 flight controller for Betaflight, designed in KiCad. Pin mapping follows the SpeedyBee F405 V3 (SPEEDYBEEF405V3 target).
1. F.Cu: components and signals 2. In1: GND plane 3. In2: +3V3 plane 4. B.Cu: signals, wire pads, microSD socket
Main components on the Kurc f405
Kurc f405 bill of materials (BOM)
78 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54360DDAR TPS54360DDA | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | BMI270 | Bosch_LGA-14_3x2.5mm_P0.5mm | U5 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | 8 MHz 3225 crystal, CL 12 pF 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HRO TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Hirose DM3AT-SF-PEJM5 microSD | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | JST SM08B-SRSS-TB ESC | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J3 |
| 1 | RX: 5V G T1 R1 | SolderPads_1x04_P2.54mm | J4 |
| 1 | VTX: VBAT G T2 R2 | SolderPads_1x04_P2.54mm | J5 |
| 1 | GPS: 5V G T3 R3 | SolderPads_1x04_P2.54mm | J6 |
| 1 | UART6: 3V3 G T6 R6 | SolderPads_1x04_P2.54mm | J7 |
| 1 | LED: 5V G LED | SolderPads_1x03_P2.54mm | J8 |
| 1 | BUZ: + - | SolderPads_1x02_P2.54mm | J9 |
| 1 | SWD: 3V3 IO CK RST G | SolderPads_1x05_P2.54mm | J10 |
| 1 | I2C: 3V3 G SCL SDA | SolderPads_1x04_P2.54mm | J11 |
| 1 | C&K PTS810 SJM 250 SMTR LFS BOOT | SW_SPST_PTS810 | SW1 |
| 1 | SMBJ30A | D_SMB | D1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B360B-13-F B360B | D_SMB | D2 |
| 1 | B5819W | D_SOD-123 | D3 |
| 1 | 0603 red LED RED | LED_0603_1608Metric | D4 |
| 1 | 0603 blue LED BLUE | LED_0603_1608Metric | D5 |
| 2 | BLM18PG601SN1D 600R@100MHz | L_0603_1608Metric | FB1, FB2 |
| 1 | SRN8040TA-100M 10uH 4A | L_Bourns_SRN8040TA | L1 |
| 2 | 1206 10uF 50V X7R/X5R 10uF 50V | C_1206_3216Metric | C1, C2 |
| 1 | 0603 100nF 50V X7R/X5R 100nF 50V | C_0603_1608Metric | C3 |
| 1 | 0603 100nF X7R/X5R 100nF | C_0603_1608Metric | C4 |
| 1 | 0402 8.2nF X7R/X5R 8.2nF | C_0402_1005Metric | C5 |
| 1 | 0402 47pF X7R/X5R 47pF | C_0402_1005Metric | C6 |
| 2 | 0805 22uF 10V X7R/X5R 22uF 10V | C_0805_2012Metric | C7, C8 |
| 3 | 0603 1uF X7R/X5R 1uF | C_0603_1608Metric | C9, C18, C26 |
| 3 | 0603 2.2uF X7R/X5R 2.2uF | C_0603_1608Metric | C10, C19, C20 |
| 12 | 0402 100nF X7R/X5R 100nF | C_0402_1005Metric | C11, C12, C13, C14, C15, C17, C21, C24 +4 |
| 1 | 0603 4.7uF X7R/X5R 4.7uF | C_0603_1608Metric | C16 |
| 2 | 0402 18pF X7R/X5R 18pF | C_0402_1005Metric | C22, C23 |
| 1 | 0805 10uF X7R/X5R 10uF | C_0805_2012Metric | C27 |
| 1 | 0603 162k 1% 162k | R_0603_1608Metric | R1 |
| 1 | 0603 52.3k 1% 52.3k | R_0603_1608Metric | R2 |
| 8 | 0603 10k 1% 10k | R_0603_1608Metric | R3, R6, R7, R11, R12, R13, R14, R15 |
| 1 | 0603 8.45k 1% 8.45k | R_0603_1608Metric | R4 |
| 5 | 0603 1k 1% 1k | R_0603_1608Metric | R5, R8, R16, R17, R18 |
| 2 | 0603 5.1k 1% 5.1k | R_0603_1608Metric | R9, R10 |
| 1 | 0603 100k 1% 100k | R_0603_1608Metric | R19 |
| 2 | 0603 4.7k 1% 4.7k | R_0603_1608Metric | R20, R21 |
Kurc f405 design files
The KiCad project lives in the ganymede451/kurc-f405 repository on GitHub; these links point at the commit this page was built from.
Kurc f405: common questions
What microcontroller does the Kurc f405 use?
The Kurc f405 is built around the STM32F405RGT6, from the STM32 family.
How big is the Kurc f405 PCB?
The Kurc f405 measures 39.9 × 39.9 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Kurc f405?
78 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kurc f405 design files?
From the ganymede451/kurc-f405 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kurc f405 design in my own project?
The repository has no license, so all rights stay with ganymede451. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kurc f405 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k