IsoISE-feather
garethhcoleman·IsoISE-feather
About the IsoISE-feather PCB
IsoISE-feather is an open source PCB design by garethhcoleman, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50.8 × 22.9 mm, with 31 components from 19 distinct parts.
Other key parts include the MTU1D0305MC, ADUM1250, MCP4017, TL072 and REF3130. By type, the board carries 11 resistors, 9 capacitors, 6 ICs, 3 connectors and 2 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware files for IsoISE feather board
This circuit is heavily based on wonderful work by Ryan Edwards at sparkyswidgets.com.
I emailed Ryan because I wanted to ask if he was happy for me to just make his isoion project, which is not strictly necessary but I think is good manners. He gave me his blessing to go ahead. I thought it was especially important to do this since he was selling his projects (although not this one, my orignal motivation for making it) and I wasn't then intending to modify his design. Subsequently I took the bull by the horns and dove into (partially!) understanding and modifying his designs, so I took his…

Main components on the IsoISE-feather
IsoISE-feather bill of materials (BOM)
31 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MTU1D0305MC | 5pinMTU | U1 |
| 1 | ADUM1250 ADUM1250ARZ | SOIC-8-N | U2 |
| 1 | MCP4017 | SOT-363_SC-70-6_Handsoldering | U3 |
| 1 | TL072 | SOP-8L | U4 |
| 1 | REF3130 | SOT-23_Handsoldering | U5 |
| 1 | MCP3221 | SOT-23-5_HandSoldering | U6 |
| 1 | CONN_01X03 Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | BNC | BNC_Socket_Gmod | J2 |
| 1 | FEATHER | FeatherWing | J3 |
| 2 | 10UH 10uH | Inductor_Murata_8200 | L1, L2 |
| 5 | 0.1UF 0.1uF | C_0603_HandSoldering | C1, C2, C5, C6, C9 |
| 3 | 10UF 10uF | C_0805_HandSoldering | C3, C4, C7 |
| 1 | 220PF 220pF | C_0603_HandSoldering | C8 |
| 3 | 3K | R_0603_HandSoldering | R1, R2, R9 |
| 3 | 4.7K | R_0603_HandSoldering | R4, R5, R6 |
| 1 | 10K | R_0603_HandSoldering | R7 |
| 2 | 100K | R_0603_HandSoldering | R8, R10 |
| 1 | 1K | R_0603_HandSoldering | R11 |
| 1 | 500R | R_0603_HandSoldering | R12 |
IsoISE-feather design files
The KiCad project lives in the garethhcoleman/IsoISE-feather repository on GitHub; these links point at the commit this page was built from.
IsoISE-feather: common questions
How big is the IsoISE-feather PCB?
The IsoISE-feather measures 50.8 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IsoISE-feather?
31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IsoISE-feather design files?
From the garethhcoleman/IsoISE-feather repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the IsoISE-feather design in my own project?
Yes, under the terms of its GPL-3.0 license, which garethhcoleman chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979