10 open source boards using the MCP3221
Real designs built with the MCP3221, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673ESP32
SenseEHajo
ehajo
141 × 56.9 mm97 parts2LNo license5ESP32
Tanklevel
Th3Link
70 × 60 mm68 parts4LCERN-OHL-S-2.04ESP32
STARLITE PRODUCTION
AndrewJ-25
154.2 × 250 mm62 parts2LNo license3IsoISE-feather
garethhcoleman
50.8 × 22.9 mm31 parts2LGPL-3.00ESP32
Iv21-vfd clock with esp32
billism1
101.5 × 40 mm30 parts2LMIT0ESP32
Digisax
AndrewJ-25
103 × 250 mm61 parts2LNo license3Raspberry Pi
Rpi board
elkel53930
70 × 66.6 mm32 parts4LNo license2Maka BMS
ocean-discovery-league
39 × 35.2 mm95 parts4LNo license0THTIC
MetalMusings
41.5 × 30.5 mm23 parts2LNo license93
How designs wire the MCP3221
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP3221 connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
- The VDD pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 1 µF).
- The AIN pin has a capacitor to GND on 5 of 9 designs, most often 470 pF (then 220 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 78% · a signal 22% |
|
| VSSpin 2 | Connected to: GND 100% | — |
| AINpin 3 | Connected to: Signal 100% |
|
| SDApin 4 | Connected to: A connector 44%, the microcontroller 44% |
|
| SCLpin 5 | Connected to: A connector 44%, the microcontroller 44% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Haxo hw by cardonabits, THTIC by MetalMusings, SenseEHajo by ehajo and Tanklevel by Th3Link.
The MCP3221 in open source designs
The gallery holds 10 open source boards using the MCP3221 from 9 GitHub repositories; a typical one measures about 85.8 × 58.5 mm and carries around 50 components.
70% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Haxo hw by cardonabits.
Parts used alongside the MCP3221
Microcontrollers on boards using the MCP3221
What boards using the MCP3221 are built for
MCP3221: common questions
Where can I find a MCP3221 reference design?
Each of the 10 boards on this page is a real design using the MCP3221. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MCP3221 SDA pin?
The SDA pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the MCP3221.
What pull-up resistor is used on the MCP3221 SCL pin?
The SCL pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the MCP3221.
What decoupling capacitors do designs use on the MCP3221 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the MCP3221.
Which microcontrollers do boards using the MCP3221 use?
Most are built on ESP32 (5) and Raspberry Pi (2).
How big is a typical board using the MCP3221?
The median is 85.8 × 58.5 mm, and 70% are two-layer designs.
What is the most popular open source board using the MCP3221?
By GitHub stars, Haxo hw by cardonabits, with 673 stars.
Can I simulate one of these boards using the MCP3221 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.