HardLabs

ECE-299-Radio

garrettma03·ECE-299-Radio·Radio/Radio.kicad_pcb

ECE-299-Radio PCB layout, top view — open source Raspberry Pi board by garrettma03

About the ECE-299-Radio PCB

ECE-299-Radio is an open source Raspberry Pi PCB design by garrettma03, published on GitHub. It is a 4-layer board measuring 75 × 75 mm, with 28 components from 15 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the LM386 and RDA5807M_Module. By type, the board carries 9 resistors, 8 capacitors, 4 switches, 2 ICs, 1 module and 1 speaker.

It belongs with the rf & radio designs in this gallery.

From the project

Project containing files for ECE 299

Main components on the ECE-299-Radio

LM386RDA5807M_ModuleRaspberryPi_Pico_W

ECE-299-Radio bill of materials (BOM)

28 components, 15 distinct parts.

QtyPartRefs
1
LM386
U1
1
RDA5807M_Module
U2
1
RaspberryPi_Pico_W
A1
1
Speaker
LS1
2
2k
Rpullup1, Rpullup2
2
Rotary Encoder
SW1, SW2
2
SW_Push
SW3, SW4
1
OLED Display
DISP1
2
10uF
C1, C4
3
470uF
C2, C6, C8
1
0.05uF
C3
2
0.1uF
C5, C7
1
10
R1
1
1.2K
R2
7
10K
R3, R4, R5, R6, R7, R8, R9

ECE-299-Radio design files

The KiCad project lives in the garrettma03/ECE-299-Radio repository on GitHub; these links point at the commit this page was built from.

ECE-299-Radio: common questions

What microcontroller does the ECE-299-Radio use?

The ECE-299-Radio is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the ECE-299-Radio PCB?

The ECE-299-Radio measures 75 × 75 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ECE-299-Radio?

28 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the ECE-299-Radio design files?

From the garrettma03/ECE-299-Radio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ECE-299-Radio design in my own project?

The repository has no license, so all rights stay with garrettma03. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ECE-299-Radio without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards