Ryan
garth-martinsen·ryan·PCB/BMS_SMD_8_14_26/BMS_SMD_8_14_26.kicad_pcb
About the Ryan PCB
Ryan is an open source PCB design by garth-martinsen, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.3 × 37.7 mm, with 21 components from 15 distinct parts.
Other key parts include the INA180A1. By type, the board carries 8 connectors, 7 resistors, 4 capacitors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
python projects collaborating with Ryan Pullen
Schematic and PCB Layout for latest working PCB.
Main components on the Ryan
Ryan bill of materials (BOM)
21 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA180A1 | SOT-23-5 | U1 |
| 1 | ADS_1115 | PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | MP_OUT- | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | MP_OUT+ | PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | MP_VIN- | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | MP_VIN+ | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | VTAP_INPUTS | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | MCU_PINS | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | GPS_PINS | PinSocket_1x05_P2.54mm_Vertical | J8 |
| 1 | 0.05Ω | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | RS1 |
| 4 | ~ | C_1206_3216Metric | C0, C1, C2, C3 |
| 3 | 100K | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R01, R12, R22 |
| 2 | 330K | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R02, R21 |
| 1 | 1k | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R3 |
| 1 | 220K | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R11 |
Ryan design files
The KiCad project lives in the garth-martinsen/ryan repository on GitHub; these links point at the commit this page was built from.
Ryan: common questions
How big is the Ryan PCB?
The Ryan measures 45.3 × 37.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ryan?
21 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ryan design files?
From the garth-martinsen/ryan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ryan design in my own project?
Yes, under the terms of its GPL-3.0 license, which garth-martinsen chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k