Power supply unit
GaryBlackbourne·raspberry-robot·pcbs/power-supply-unit/power-supply-unit.kicad_pcb
About the Power supply unit PCB
Power supply unit is an open source PCB design by GaryBlackbourne, published on GitHub. It is a 2-layer board measuring 37.5 × 86 mm, with 20 components from 14 distinct parts.
Other key parts include the LM2576S-ADJ and AMS1117-3.3. By type, the board carries 6 capacitors, 4 resistors, 3 ICs, 3 connectors, 2 diodes and 2 inductors.
It belongs with the robotics & motion and power & battery designs in this gallery.
Main components on the Power supply unit
Power supply unit bill of materials (BOM)
20 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM2576S-ADJ | TO-263-5_TabPin3 | U1, U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | BMS_OUTPUT | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | PWR_CONN_RASPI | PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | PWR_CONN_CTRL | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 2 | D_Schottky | D_DO-201AD_P15.24mm_Horizontal | D1, D2 |
| 2 | 100u | L_Fastron_PISR_Handsoldering | L1, L2 |
| 2 | 100u | C_Elec_6.3x7.7 | C1, C2 |
| 2 | 1000u | C_Elec_10x10.2 | C3, C4 |
| 1 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 1 | 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Power supply unit design files
The KiCad project lives in the GaryBlackbourne/raspberry-robot repository on GitHub; these links point at the commit this page was built from.
Power supply unit: common questions
How big is the Power supply unit PCB?
The Power supply unit measures 37.5 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power supply unit?
20 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power supply unit design files?
From the GaryBlackbourne/raspberry-robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power supply unit design in my own project?
The repository has no license, so all rights stay with GaryBlackbourne. Use it as a reference, and ask the author before reusing the design.
More boards in raspberry-robot
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k