Poncho EDU-CIAA wifi blth

gcocce·poncho_EDU-CIAA_wifi_blth

Poncho EDU-CIAA wifi blth PCB layout, top view — open source ESP32 board by gcocce

About the Poncho EDU-CIAA wifi blth PCB

Poncho EDU-CIAA wifi blth is an open source ESP32 PCB design by gcocce, published on GitHub. It is a board measuring 51.7 × 57.2 mm, with 21 components from 16 distinct parts.

Its main chip is the ESP32-WROOM, from the ESP32 family. By type, the board carries 8 resistors, 5 capacitors, 3 diodes, 2 switches, 1 IC and 1 connector.

It belongs with the iot & wireless designs in this gallery.

From the project

PCB board design to provide Wifi and Bth for EDU-CIAA board

Main components on the Poncho EDU-CIAA wifi blth

Poncho EDU-CIAA wifi blth bill of materials (BOM)

21 components, 16 distinct parts.

QtyPartRefs
1
ESP32-WROOM
U1
1
UART
J1
1
Reset
SW1
1
Boot
SW2
1
Conn_Poncho2P_2x_20x2
XA1
1
LED_Rojo
D1
1
LED_Verde
D2
1
LED_Amarillo
D3
1
0,1uF
C1
1
10uF
C2
2
1nF
C3, C5
1
0,1nF
C4
3
402
R1, R4, R5
1
10k
R2
2
470
R3, R6
2
5k
R7, R8

Poncho EDU-CIAA wifi blth design files

The KiCad project lives in the gcocce/poncho_EDU-CIAA_wifi_blth repository on GitHub; these links point at the commit this page was built from.

Poncho EDU-CIAA wifi blth: common questions

What microcontroller does the Poncho EDU-CIAA wifi blth use?

The Poncho EDU-CIAA wifi blth is built around the ESP32-WROOM, from the ESP32 family.

How big is the Poncho EDU-CIAA wifi blth PCB?

The Poncho EDU-CIAA wifi blth measures 51.7 × 57.2 mm and is 1.6 mm thick.

How many components are on the Poncho EDU-CIAA wifi blth?

21 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Poncho EDU-CIAA wifi blth design files?

From the gcocce/poncho_EDU-CIAA_wifi_blth repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Poncho EDU-CIAA wifi blth design in my own project?

The repository has no license, so all rights stay with gcocce. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Poncho EDU-CIAA wifi blth without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards