Split-Keyboard

gear29·Split-Keyboard

Split-Keyboard PCB layout, top view — open source Nordic nRF board by gear29

About the Split-Keyboard PCB

Split-Keyboard is an open source Nordic nRF PCB design by gear29, published on GitHub. It is a 2-layer board measuring 249.5 × 100.8 mm, with 86 components from 3 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 42 switches, 42 diodes and 2 ICs.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

This is a key board but 2

A custom wireless split mechanical keyboard powered by two Seeed Studio XIAO nRF52840 controllers and ZMK firmware.

Wireless Split Keyboard is a custom split keyboard designed around two independently powered wireless halves. Each half uses a Seeed Studio XIAO nRF52840 microcontroller and communicates using ZMK's split keyboard functionality.

The goal of this project is to create a fully custom keyboard, including its PCB, firmware, and mechanical design.

Split-Keyboard, from the project README
From the project README

Main components on the Split-Keyboard

Split-Keyboard bill of materials (BOM)

86 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U2
42
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +34
42
D
D1, D2, D3, D4, D5, D6, D7, D8 +34

Split-Keyboard design files

The KiCad project lives in the gear29/Split-Keyboard repository on GitHub; these links point at the commit this page was built from.

Split-Keyboard: common questions

What microcontroller does the Split-Keyboard use?

The Split-Keyboard is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the Split-Keyboard PCB?

The Split-Keyboard measures 249.5 × 100.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Split-Keyboard?

86 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Split-Keyboard design files?

From the gear29/Split-Keyboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Split-Keyboard design in my own project?

The repository has no license, so all rights stay with gear29. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Split-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards