87 open source boards using the XIAO-nRF52840-SMD

Real designs built with the XIAO-nRF52840-SMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

87 boardsClear filters|Most starred

How designs wire the XIAO-nRF52840-SMD

Read from the KiCad layouts of 58 open source designs, one per repository: what each pin of the XIAO-nRF52840-SMD connects to, and the resistors, capacitors and other passives placed on it.

  • The RESET pin is left unconnected on 50 of 52 designs (a signal on 2).
  • The 5V pin is left unconnected on 44 of 57 designs (5V on 9, a signal on 4).
  • The NFC2 pin is left unconnected on 42 of 52 designs (GND on 3, a signal on 7).
  • The PA30_SWCLK pin is left unconnected on 41 of 52 designs (GND on 5, a signal on 6).
3V3pin 12Connected to: Not connected 62% · 3.3V 31%
5Vpin 14Connected to: Not connected 77% · 5V 16%
NFC1pin 17Connected to: Not connected 77% · a signal 23%
NFC2pin 18Connected to: Not connected 81%
PA31_SWDIOpin 19Connected to: Not connected 77%
PA30_SWCLKpin 20Connected to: Not connected 79%
RESETpin 21Connected to: Not connected 96%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wlfkbd by WillACosta, Hexboard by hephaestushex, Modular-Keyboard by hashim-cpro and Hackpadplusplus by 0x62b.

The XIAO-nRF52840-SMD in open source designs

The gallery holds 87 open source boards using the XIAO-nRF52840-SMD from 73 GitHub repositories; a typical one measures about 203.1 × 109.3 mm and carries around 82 components.

98% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is Wlfkbd by WillACosta.

Microcontrollers on boards using the XIAO-nRF52840-SMD

XIAO-nRF52840-SMD: common questions

Where can I find a XIAO-nRF52840-SMD reference design?

Each of the 87 boards on this page is a real design using the XIAO-nRF52840-SMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO-nRF52840-SMD RESET pin connected?

The RESET pin is left unconnected on 50 of 52 designs (a signal on 2). Counted from the KiCad layouts of 58 open source designs using the XIAO-nRF52840-SMD.

How is the XIAO-nRF52840-SMD 5V pin connected?

The 5V pin is left unconnected on 44 of 57 designs (5V on 9, a signal on 4). Counted from the KiCad layouts of 58 open source designs using the XIAO-nRF52840-SMD.

How is the XIAO-nRF52840-SMD NFC2 pin connected?

The NFC2 pin is left unconnected on 42 of 52 designs (GND on 3, a signal on 7). Counted from the KiCad layouts of 58 open source designs using the XIAO-nRF52840-SMD.

What parts are used alongside the XIAO-nRF52840-SMD?

The XIAO-nRF52840-DIP, XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD and XIAO-ESP32-C6-DIP appear in the most repositories here.

Which microcontrollers do boards using the XIAO-nRF52840-SMD use?

Most are built on Nordic nRF (71), RP2040/RP2350 (15) and ESP32 (1).

How big is a typical board using the XIAO-nRF52840-SMD?

The median is 203.1 × 109.3 mm, and 98% are two-layer designs.

What is the most popular open source board using the XIAO-nRF52840-SMD?

By GitHub stars, Wlfkbd by WillACosta, with 19 stars.

Can I simulate one of these boards using the XIAO-nRF52840-SMD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part