Pikvm zimacube pcie
geleynse·pikvm-zimacube-pcie
About the Pikvm zimacube pcie PCB
Pikvm zimacube pcie is an open source PCB design by geleynse, published on GitHub. It is a 2-layer board measuring 146 × 72.9 mm, with 21 components from 12 distinct parts.
Other key parts include the PC817. By type, the board carries 9 resistors, 5 connectors, 4 ICs and 3 diodes.
It belongs with the power & battery designs in this gallery.
From the project
ZimaCube PiKVM PCIe Card v2.1 - Custom PCIe card to mount a Raspberry Pi 4 inside a ZimaCube Pro NAS
A PCIe form-factor card that mounts a Raspberry Pi 4 inside a ZimaCube Pro NAS for use as a PiKVM. Self-powered from the PCIe slot -- no external power supply needed.
Wayward Signal Systems -- waywardsignalsystems.com
- Overview - Block Diagram - Board Specs - Schematic Diagrams - Pi 4 Pogo Pin Placement Guide - USB OTG Connection - PCIe Pinout - Bill of Materials - PCB Layout Guidelines - ZimaCube Installation Guide - JLCPCB Ordering Instructions - Build Notes - Files
Main components on the Pikvm zimacube pcie
Pikvm zimacube pcie bill of materials (BOM)
21 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PC817 | SOP-4_7.5x4.1mm_P2.54mm | U1, U2, U3, U4 |
| 1 | Pi_GPIO_2x20 | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Bus_PCI_Express_x8 | BUS_PCIexpress_x8 | J2 |
| 1 | ATX_FrontPanel_2x5 | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | I2C_Breakout | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UART_Breakout | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LED_Green | LED_0805_2012Metric | D1 |
| 1 | LED_White | LED_0805_2012Metric | D2 |
| 1 | LED_Yellow | LED_0805_2012Metric | D3 |
| 4 | 220R | R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 4.7k | R_0805_2012Metric | R5, R6 |
| 3 | 1k | R_0805_2012Metric | R8, R9, R10 |
Pikvm zimacube pcie design files
The KiCad project lives in the geleynse/pikvm-zimacube-pcie repository on GitHub; these links point at the commit this page was built from.
- Layoutpikvm-zimacube-pcie.kicad_pcb
- Schematicpikvm-zimacube-pcie.kicad_sch
Pikvm zimacube pcie: common questions
How big is the Pikvm zimacube pcie PCB?
The Pikvm zimacube pcie measures 146 × 72.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pikvm zimacube pcie?
21 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pikvm zimacube pcie design files?
From the geleynse/pikvm-zimacube-pcie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pikvm zimacube pcie design in my own project?
The repository has no license, so all rights stay with geleynse. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k