Wh3lk

genoqllc·wh3lk·hardware/wh3lk.kicad_pcb

Wh3lk PCB layout, top view — open source board by genoqllc

About the Wh3lk PCB

Wh3lk is an open source PCB design by genoqllc, published on GitHub under the Custom license license. It is a 4-layer board measuring 45 × 33.5 mm, with 22 components from 10 distinct parts.

Other key parts include the LD1117S33TR_SOT223 and LM4040DIM3-10.0/NOPB. By type, the board carries 10 capacitors, 4 inductors, 3 diodes, 2 ICs, 2 connectors and 1 resistor.

It belongs with the audio designs in this gallery.

From the project

Lil eurorack power module, primarily for prototyping.

A lil eurorack power module, primilary for prototyping. Takes 16 pin eurorack power and outputs:

- +12V - +5V - +3.3V - +3.3VA (filtered for analog devices) - -12V - -10V reference - GND

Upon merging to main and creating a release, the Makefile.yml Github Action will build the project and attach the following to the release:

- wh3lk-$(GITTAG).zip - Gerbers, drill files, DRC report - wh3lk-$(GITTAG).bom.csv - A BOM in CSV format, ready for JLCPCB assembly - wh3lk-$(GITTAG).bom.xml - Original KiCad XML BOM - wh3lk-$(GITTAG).pos.csv - A POS in CSV format, ready for JLCPCB assembly

Wh3lk, from the project README
From the project README

Main components on the Wh3lk

Wh3lk bill of materials (BOM)

22 components, 10 distinct parts.

QtyPartRefs
1
LD1117S33TR_SOT223
U1
1
LM4040DIM3-10.0/NOPB
LM4040DBZ-10
U2
1
302-S101
Eurorack_Power
J1
1
Conn_01x08_Pin
J2
3
30V
D1, D2, D3
4
600R@100MHz
FB1, FB2, FB3, FB4
8
22uF
C1, C2, C3, C4, C5, C6, C7, C10
1
10uF
C8
1
100nF
C9
1
2k2R
R1

Wh3lk design files

The KiCad project lives in the genoqllc/wh3lk repository on GitHub; these links point at the commit this page was built from.

Wh3lk: common questions

How big is the Wh3lk PCB?

The Wh3lk measures 45 × 33.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Wh3lk?

22 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wh3lk design files?

From the genoqllc/wh3lk repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Wh3lk design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards