Musical alarm clock
Geofoods·musical-alarm-clock·PCB/musicalalarmclock.kicad_pcb
About the Musical alarm clock PCB
Musical alarm clock is an open source ESP32 PCB design by Geofoods, published on GitHub. It is a 2-layer board measuring 90 × 48.5 mm, with 7 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-C3, from the ESP32 family. By type, the board carries 4 switches, 1 IC, 1 connector and 1 buzzer.
From the project
An alarm clock with a Seeed Studio XIAO ESP32, a TFT display, and a piezo buzzer. The project includes firmware, a custom PCB, and a 3D-printed enclosure.
An alarm clock with a Seeed Studio XIAO ESP32, a TFT display, and a piezo buzzer. The project includes firmware, a custom PCB, and a 3D-printed enclosure.
- Large clock display on a 320×240 TFT screen - Piezo buzzer alarm with "WAKE UP!" visual alert - 4-button interface for setting the alarm hour/minute - Configurable alarm time with a simple state-machine UI - Compact 90mm × 48.5mm PCB form factor - Plays a unique melody for the alarm
Main components on the Musical alarm clock
Musical alarm clock bill of materials (BOM)
7 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3 XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-DIP | U1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
Musical alarm clock design files
The KiCad project lives in the Geofoods/musical-alarm-clock repository on GitHub; these links point at the commit this page was built from.
Musical alarm clock: common questions
What microcontroller does the Musical alarm clock use?
The Musical alarm clock is built around the XIAO-ESP32-C3, from the ESP32 family.
How big is the Musical alarm clock PCB?
The Musical alarm clock measures 90 × 48.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Musical alarm clock?
7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Musical alarm clock design files?
From the Geofoods/musical-alarm-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Musical alarm clock design in my own project?
The repository has no license, so all rights stay with Geofoods. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Musical alarm clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k