15 open source boards using the L298HN

Real designs built with the L298HN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the L298HN

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the L298HN connects to, and the resistors, capacitors and other passives placed on it.

SENSE_Apin 1Connected to: GND 46% · a signal 46%
  • Resistor to GND on 31% · 100 mΩ (1), 1 Ω (1)
GNDpin 8Connected to: GND 85% · a signal 15%
VSSpin 9Connected to: 5V 69% · a signal 31%
  • Decoupling capacitor on 31% · 100 µF (2), 100 nF (1)
SENSE_Bpin 15Connected to: GND 50% · a signal 50%
  • Resistor to GND on 33% · 100 mΩ (1), 1 Ω (1)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Driving module by schuhumi, Juca by MatheusPinto, Bluepill expansion by GinoAvanzini and Car by AndreHatu.

The L298HN in open source designs

The gallery holds 15 open source boards using the L298HN from 14 GitHub repositories; a typical one measures about 92.5 × 73.2 mm and carries around 40 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Driving module by schuhumi.

Parts used alongside the L298HN

Microcontrollers on boards using the L298HN

L298HN: common questions

Where can I find a L298HN reference design?

Each of the 15 boards on this page is a real design using the L298HN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the L298HN?

The BluePill_STM32F103C, L7805 and MCP2551-I-P appear in the most repositories here.

Which microcontrollers do boards using the L298HN use?

Most are built on ESP32 (4), AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the L298HN?

The median is 92.5 × 73.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the L298HN?

By GitHub stars, Driving module by schuhumi, with 38 stars.

Can I simulate one of these boards using the L298HN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part