Vantage-System

Georgebruh·Vantage-System·sensor-board/Vantage_Sensor.kicad_pcb

Vantage-System PCB layout, top view — open source ESP32 board by Georgebruh

About the Vantage-System PCB

Vantage-System is an open source ESP32 PCB design by Georgebruh, published on GitHub. It is a 2-layer board measuring 110 × 30 mm, with 24 components from 20 distinct parts.

Its main chip is the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family. By type, the board carries 9 resistors, 5 connectors, 4 capacitors, 2 jumpers, 2 diodes and 1 IC.

It belongs with the sensors, power & battery and iot & wireless designs in this gallery.

From the project

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system. This repository holds the hardware (schematics, PCB layout, libraries, drawings and the instruction documents) and the node firmware.

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system. This repository holds the hardware (schematics, PCB layout, libraries, drawings and the instruction documents) and the node firmware.

Current revision: Rev A (2026-10-25), tag rev-A.

The node is two boards joined by one 6-way JST XH cable (J1 to J1):

Main components on the Vantage-System

Vantage-System bill of materials (BOM)

24 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DevKitC-1 N16R8
U1
1
POWER
J1
1
AJ-SR04M
J2
1
BME280
J3
1
RAIN
J4
1
TF-Luna
J5
1
PTC 0.2A
F1
1
3V3 FEED
JP1
1
BENCH 5V
JP2
1
SS14
D1
1
SMAJ6.0A
D2
1
10UF
10uF
C1
1
22UF
22uF
C2
1
1UF
1uF
C3
1
100NF
100nF
C4
4
1k
R1, R4, R5, R11
1
10K
10k
R2
1
18K
18k
R3
1
100R
R6
2
220R
R7, R8

Vantage-System design files

The KiCad project lives in the Georgebruh/Vantage-System repository on GitHub; these links point at the commit this page was built from.

Vantage-System: common questions

What microcontroller does the Vantage-System use?

The Vantage-System is built around the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family.

How big is the Vantage-System PCB?

The Vantage-System measures 110 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vantage-System?

24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vantage-System design files?

From the Georgebruh/Vantage-System repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vantage-System design in my own project?

The repository has no license, so all rights stay with Georgebruh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vantage-System without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards