7 open source boards using the ESP32-S3-DevKitC-1 N16R8

Real designs built with the ESP32-S3-DevKitC-1 N16R8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ESP32-S3-DevKitC-1 N16R8

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S3-DevKitC-1 N16R8 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 14 is left unconnected on 4 of 4 designs.
  • Pin 23 is tied to GND on 4 of 4 designs.
  • Pin 33 is left unconnected on 4 of 4 designs.
  • Pin 34 is left unconnected on 4 of 4 designs.
Pin 3Connected to: Not connected 75% · a signal 25%
Pin 4Connected to: A connector 50%
  • Series resistor on 50% · 10 kΩ (2)
  • Resistor to GND on 50% · 18 kΩ (2)
Pin 5Connected to: A connector 50%
  • Series resistor on 50% · 1 kΩ (2)
Pin 11Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2)
Pin 13Connected to: Not connected 75% · a signal 25%
Pin 14Connected to: Not connected 100%
Pin 23Connected to: GND 100%
Pin 24Connected to: Not connected 75% · a signal 25%
Pin 25Connected to: Not connected 75% · a signal 25%
Pin 26Connected to: Signal 100%
  • Series resistor on 50% · 1 kΩ (2)
  • Capacitor to GND on 50% · 100 nF (2)
Pin 27Connected to: Signal 100%
  • Series resistor on 75% · 100 Ω (2), 220 Ω (1)
Pin 28Connected to: A connector 50%
  • Series resistor on 50% · 220 Ω (2)
Pin 29Connected to: Signal 100%
  • Series resistor on 50% · 220 Ω (2)
Pin 30Connected to: Signal 100%
  • Series resistor on 50% · 1 kΩ (2)
Pin 31Connected to: Signal 100%
  • Series resistor on 50% · 1 kΩ (2)
Pin 33Connected to: Not connected 100%
Pin 34Connected to: Not connected 100%
Pin 35Connected to: Not connected 100%
Pin 36Connected to: Not connected 75% · a signal 25%
Pin 37Connected to: Not connected 75% · a signal 25%
Pin 41Connected to: Not connected 100%
Pin 42Connected to: Not connected 100%

22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S3 Carrier by Yoursel71, Vantage-System by Georgebruh, Vantage — Sensor board by Georgebruh and Mainboard by Kalilinuxloverr.

The ESP32-S3-DevKitC-1 N16R8 in open source designs

The gallery holds 7 open source boards using the ESP32-S3-DevKitC-1 N16R8 from 7 GitHub repositories; a typical one measures about 110 × 92.5 mm and carries around 35 components.

100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is ESP32S3 Carrier by Yoursel71.

Microcontrollers on boards using the ESP32-S3-DevKitC-1 N16R8

What boards using the ESP32-S3-DevKitC-1 N16R8 are built for

ESP32-S3-DevKitC-1 N16R8: common questions

Where can I find a ESP32-S3-DevKitC-1 N16R8 reference design?

Each of the 7 boards on this page is a real design using the ESP32-S3-DevKitC-1 N16R8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-DevKitC-1 N16R8 pin 14 connected?

Pin 14 is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DevKitC-1 N16R8.

How is the ESP32-S3-DevKitC-1 N16R8 pin 23 connected?

Pin 23 is tied to GND on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DevKitC-1 N16R8.

How is the ESP32-S3-DevKitC-1 N16R8 pin 33 connected?

Pin 33 is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-DevKitC-1 N16R8.

Which microcontrollers do boards using the ESP32-S3-DevKitC-1 N16R8 use?

Most are built on ESP32 (7).

How big is a typical board using the ESP32-S3-DevKitC-1 N16R8?

The median is 110 × 92.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-S3-DevKitC-1 N16R8?

By GitHub stars, ESP32S3 Carrier by Yoursel71, with 1 stars.

Can I simulate one of these boards using the ESP32-S3-DevKitC-1 N16R8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part