Vantage — Sensor board

Georgebruh·Vantage-System-for-ANDAM·sensor-board/Vantage_Sensor.kicad_pcb

Vantage — Sensor board layout, top view — open source ESP32 board by Georgebruh

About the Vantage — Sensor board

Vantage — Sensor board is an open source ESP32 PCB design by Georgebruh, published on GitHub. It is a 2-layer board measuring 110 × 30 mm, with 24 components from 23 distinct parts.

Its main chip is the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family. By type, the board carries 9 resistors, 5 connectors, 4 capacitors, 2 jumpers, 2 diodes and 1 IC.

It belongs with the sensors, power & battery and iot & wireless designs in this gallery.

From the project

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system. This repository holds the hardware (schematics, PCB layout, libraries, drawings and the instruction documents) and the node firmware.

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system. This repository holds the hardware (schematics, PCB layout, libraries, drawings and the instruction documents) and the node firmware.

Current release: Rev B (2026-11-05), tag rev-B: power board Rev B, sensor board Rev A (unchanged).

Main components on the Vantage — Sensor board

Vantage — Sensor board bill of materials (BOM)

24 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DevKitC-1 N16R8
U1
1
POWER
J1
1
AJ-SR04M
J2
1
BME280
J3
1
RAIN
J4
1
TF-Luna
J5
1
PTC 0.2A
F1
1
3V3 FEED
JP1
1
BENCH 5V
JP2
1
SMAJ9.0CA
SS14
D1
1
SS34
SMAJ6.0A
D2
1
22UF
10uF
C1
1
100NF
22uF
C2
1
10UF
1uF
C3
1
22UF
100nF
C4
1
10K
1k
R1
1
4.7K
10k
R2
1
4.7K
18k
R3
1
22K
1k
R4
1
3.0K
1k
R5
Show 3 more
QtyPartRefs
1
100K
100R
R6
2
220R
R7, R8
1
1k
R11

Vantage — Sensor board design files

The KiCad project lives in the Georgebruh/Vantage-System-for-ANDAM repository on GitHub; these links point at the commit this page was built from.

Vantage — Sensor board: common questions

What microcontroller does the Vantage — Sensor board use?

The Vantage — Sensor board is built around the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family.

How big is the Vantage — Sensor board?

The Vantage — Sensor board measures 110 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vantage — Sensor board?

24 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vantage — Sensor board design files?

From the Georgebruh/Vantage-System-for-ANDAM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vantage — Sensor board design in my own project?

The repository has no license, so all rights stay with Georgebruh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vantage — Sensor board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Vantage-System-for-ANDAM

Similar boards