General Register V1
georgesleen·8-BitComputer·Schematics/General Register/General Register V1.kicad_pcb
About the General Register V1 PCB
General Register V1 is an open source PCB design by georgesleen, published on GitHub. It is a 4-layer board measuring 61.6 × 32.5 mm, with 25 components from 9 distinct parts.
Other key parts include the 74LS173 and 74LS245. By type, the board carries 8 diodes, 8 resistors, 4 connectors, 3 ICs and 2 capacitors.
From the project
Repo to track my 8-bit computer progress
Heavily inspired by Ben Eater's 8-Bit computer series on youtube, with additional support from Digital Computer Electronics by Albert Paul Malvino
Main components on the General Register V1
General Register V1 bill of materials (BOM)
25 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS173 | DIP-16_W7.62mm_Socket_LongPads | U4, U5 |
| 1 | 74LS245 | DIP-20_W7.62mm_Socket_LongPads | U6 |
| 1 | Power | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J1 |
| 1 | Bus | Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal | J2 |
| 1 | Control | Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J3 |
| 1 | Current Value | Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal | J4 |
| 8 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 8 | 220 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
General Register V1 design files
The KiCad project lives in the georgesleen/8-BitComputer repository on GitHub; these links point at the commit this page was built from.
General Register V1: common questions
How big is the General Register V1 PCB?
The General Register V1 measures 61.6 × 32.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the General Register V1?
25 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the General Register V1 design files?
From the georgesleen/8-BitComputer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the General Register V1 design in my own project?
The repository has no license, so all rights stay with georgesleen. Use it as a reference, and ask the author before reusing the design.