Interface Register V1
georgesleen·8-BitComputer·Schematics/Interface Register/Interface Register V1.kicad_pcb
About the Interface Register V1 PCB
Interface Register V1 is an open source PCB design by georgesleen, published on GitHub. It is a 4-layer board measuring 61.6 × 32.5 mm, with 25 components from 9 distinct parts.
Other key parts include the 74LS173 and 74LS245. By type, the board carries 8 diodes, 8 resistors, 4 connectors, 3 ICs and 2 capacitors.
From the project
Repo to track my 8-bit computer progress
Heavily inspired by Ben Eater's 8-Bit computer series on youtube, with additional support from Digital Computer Electronics by Albert Paul Malvino
Main components on the Interface Register V1
Interface Register V1 bill of materials (BOM)
25 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS173 | DIP-16_W7.62mm_Socket_LongPads | U4, U5 |
| 1 | 74LS245 | DIP-20_W7.62mm_Socket_LongPads | U6 |
| 1 | Power | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J1 |
| 1 | Bus | Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal | J2 |
| 1 | Control | Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J3 |
| 1 | A Value | Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal | J4 |
| 8 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 8 | 220 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
Interface Register V1 design files
The KiCad project lives in the georgesleen/8-BitComputer repository on GitHub; these links point at the commit this page was built from.
Interface Register V1: common questions
How big is the Interface Register V1 PCB?
The Interface Register V1 measures 61.6 × 32.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Interface Register V1?
25 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Interface Register V1 design files?
From the georgesleen/8-BitComputer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Interface Register V1 design in my own project?
The repository has no license, so all rights stay with georgesleen. Use it as a reference, and ask the author before reusing the design.