Program Counter
georgesleen·8-BitComputer·Schematics/Program Counter/Program Counter.kicad_pcb
About the Program Counter PCB
Program Counter is an open source PCB design by georgesleen, published on GitHub. It is a 4-layer board measuring 62.6 × 31.6 mm, with 27 components from 11 distinct parts.
Other key parts include the 74LS161 and 74LS245. By type, the board carries 10 resistors, 8 diodes, 3 ICs, 3 connectors, 2 capacitors and 1 transistor.
From the project
Repo to track my 8-bit computer progress
Heavily inspired by Ben Eater's 8-Bit computer series on youtube, with additional support from Digital Computer Electronics by Albert Paul Malvino
Main components on the Program Counter
Program Counter bill of materials (BOM)
27 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS161 | DIP-16_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | 74LS245 | DIP-20_W7.62mm_Socket_LongPads | U3 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | Bus | Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal | J1 |
| 1 | Power | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J2 |
| 1 | Control | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3 |
| 8 | ~ | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 8 | 220 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
Program Counter design files
The KiCad project lives in the georgesleen/8-BitComputer repository on GitHub; these links point at the commit this page was built from.
Program Counter: common questions
How big is the Program Counter PCB?
The Program Counter measures 62.6 × 31.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Program Counter?
27 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Program Counter design files?
From the georgesleen/8-BitComputer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Program Counter design in my own project?
The repository has no license, so all rights stay with georgesleen. Use it as a reference, and ask the author before reusing the design.
More boards in 8-BitComputer
Instruction register
georgesleen
82.7 × 41.5 mm45 parts4LNo license0Memory
georgesleen
98.8 × 50.1 mm28 parts4LNo license0Interface Register V1
georgesleen
61.6 × 32.5 mm25 parts4LNo license0General Register V1
georgesleen
61.6 × 32.5 mm25 parts4LNo license0ALU V1
georgesleen
75.2 × 40.2 mm12 parts4LNo license0