71 open source boards using the 74LS161
Real designs built with the 74LS161, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Instruction
jes
237.5 × 102.9 mm110 parts2LUnlicense30168000
jefftranter
134.6 × 208.3 mm90 parts2LNo license13280ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042Vectron vga plus
nickbild
177.8 × 139.7 mm36 parts2LMIT39Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17- schematic only · 124 parts
Arcade-IremM92 MiSTer
MiSTer-devel
124 partsGPL-2.017 Tlcs90-rom reader
sergiopolog
111.8 × 121.9 mm54 parts2LGPL-3.015Vectron vga plus v2
nickbild
162.8 × 104.8 mm78 parts2LNo license14SPU2
rraider
400 × 300 mm736 parts2LMIT7Betadisk clone
alvaroalea
99.7 × 149.9 mm83 parts2LNo license7Northstar HD-5
abzman
190.6 × 172.4 mm154 parts2LUnlicense4AVR/Arduino
TCPU8-Alpha
halfburnttoast
150 × 150 mm138 partsGPL-2.04VIO MPF I
electrickery
156 × 100.1 mm63 parts2LNo license4AVR/Arduino
VGA SRAM Shield
levvayner
97.8 × 53.7 mm51 parts4LNo license4SBC4040
ryomuk
190.5 × 127 mm145 parts2LMIT3Sonic rec9388-keyboard
atsidaev
367 × 134.6 mm114 parts2LCC-BY-SA-4.03Pedisk2
mnaberez
143.3 × 77.5 mm43 parts2LNo license3BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2RP2040/RP2350
SORD M68 USB Keyboard Converter
tsunozemichan
130.8 × 62.2 mm46 parts2LNo license2Huhhhh I didnt save
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license18bitCPU
BrainwashAlpha
246.4 × 185.4 mm277 parts4LNo license16809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.008 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.008-bit computer
dragonruler1000
414 × 187.5 mm331 parts6LMIT08-Bit-Computer
phteven7
246.4 × 185.4 mm277 parts4LNo license08bit computer
tonygilkerson
246.4 × 185.4 mm277 parts4LNo license08bit computer
funkybooboo
246.4 × 185.4 mm277 parts4LNo license08bit-Sch old-
Arvind595
246.4 × 185.4 mm277 parts4LNo license0Backtobasic
marcusyoung
246.4 × 185.4 mm277 parts4LNo license08bit computer
ChargeInMotion
246.4 × 185.4 mm276 parts4LMIT0Instruction
OldTrail
237.5 × 102.9 mm110 parts2LNo license0PC
D10G0S1LVA
148.6 × 177.8 mm72 parts2LNo license0Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0
How designs wire the 74LS161
Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the 74LS161 connects to, and the resistors, capacitors and other passives placed on it.
- The TC pin is left unconnected on 33 of 47 designs (a signal on 13).
- The VCC pin has a decoupling capacitor on 19 of 47 designs, most often 100 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| TCpin 15 | Connected to: Not connected 70% · a signal 28% | — |
| VCCpin 16 | Connected to: 5V 98% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Instruction by jes, 68000 by jefftranter, 80ColumnCard by btb and Vectron vga plus by nickbild.
The 74LS161 in open source designs
The gallery holds 71 open source boards using the 74LS161 from 50 GitHub repositories; a typical one measures about 152.6 × 101.5 mm and carries around 71 components.
73% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is Instruction by jes.
Parts used alongside the 74LS161
Microcontrollers on boards using the 74LS161
What boards using the 74LS161 are built for
74LS161: common questions
Where can I find a 74LS161 reference design?
Each of the 71 boards on this page is a real design using the 74LS161. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS161 TC pin connected?
The TC pin is left unconnected on 33 of 47 designs (a signal on 13). Counted from the KiCad layouts of 47 open source designs using the 74LS161.
What decoupling capacitors do designs use on the 74LS161 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 47 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 47 open source designs using the 74LS161.
What parts are used alongside the 74LS161?
The 74LS04, 74LS245, 74LS00, 74LS32 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS161 use?
Most are built on AVR/Arduino (6) and RP2040/RP2350 (1).
How big is a typical board using the 74LS161?
The median is 152.6 × 101.5 mm, and 73% are two-layer designs.
What is the most popular open source board using the 74LS161?
By GitHub stars, Instruction by jes, with 301 stars.
Can I simulate one of these boards using the 74LS161 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.