Pi cemaker
georgestephanis·pi-cemaker·hardware/kicad/pi-cemaker.kicad_pcb
About the Pi cemaker PCB
Pi cemaker is an open source PCB design by georgestephanis, published on GitHub. It is a 4-layer board measuring 85 × 56 mm, with 1 components from 1 distinct parts.
Other key parts include the HUSB238.
It belongs with the power & battery designs in this gallery.
From the project
This directory contains the electrical circuit designs, schematics, Bill of Materials (BOM), and PCB layout guidelines for the Pi-cemaker 2× 18650 USB-C PD DC UPS for Raspberry Pi 5.
This directory contains the electrical circuit designs, schematics, Bill of Materials (BOM), and PCB layout guidelines for the Pi-cemaker 2× 18650 USB-C PD DC UPS for Raspberry Pi 5.
1. Circuit Schematics & Subsystems (SCHEMATICS.md) — Detailed schematic design, component ratings, formulas, and pin connections. 2. Bill of Materials (BOM.md) / BOM (CSV) — Complete BOM with MPNs, manufacturers, footprints, and distributor part numbers. 3. PCB Layout Guidelines (PCBLAYOUTGUIDELINES.md) — 4-layer stackup, 5A trace sizing, thermal vias, and decoupling layout. 4. Modular proof of concept…
Main components on the Pi cemaker
Pi cemaker bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUSB238 Hynetek | U1 |
Pi cemaker design files
The KiCad project lives in the georgestephanis/pi-cemaker repository on GitHub; these links point at the commit this page was built from.
Pi cemaker: common questions
How big is the Pi cemaker PCB?
The Pi cemaker measures 85 × 56 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pi cemaker?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pi cemaker design files?
From the georgestephanis/pi-cemaker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pi cemaker design in my own project?
The repository has no license, so all rights stay with georgestephanis. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k