19 open source boards using the Electrosmith_Daisy_Seed_Rev4
Real designs built with the Electrosmith_Daisy_Seed_Rev4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
How to-Make a-Guitar-Pedal
skngh
60 × 47 mm11 parts2LGPL-3.050DaisyPodal
motekulo
76 × 82 mm56 parts2LNo license15ESP32
BluetoothPedal Main
skngh
52 × 59 mm36 parts2LMIT9WEASEL
joebmz98
335 × 200 mm216 parts2LMIT3Seed3-DevKit-Pedal
daisyaudio
197 × 100 mm142 parts2LNo license3Seed3-DevKit-Desktop
daisyaudio
197 × 111 mm230 parts2LNo license2Echo state module
etrautmann
154 × 121 mm166 parts4LNo license2Seed3-DevKit-Eurorack
daisyaudio
141.9 × 128.5 mm130 parts2LNo license2Ogham merged v1.0
keeos-io
50 × 110 mm108 parts2LCustom license2Ouroboros
echamman
165.1 × 127 mm95 parts4LNo license2Sardinia
dominicfrugoli
241.3 × 139.7 mm93 parts4LNo license1AI-TD
jake-is-ESD-protected
63.5 × 83.8 mm84 parts4LNo license1Devboard
glittershark
198.1 × 139.7 mm123 parts2LNo license0PCB Analysis-Isolated Screen
meandthetrio
165.1 × 101.6 mm78 parts2LNo license0Podal 1590b
motekulo
54 × 60 mm56 parts2LNo license15WEASEL KiCad MainBoard
joebmz98
335 × 200 mm216 parts2LMIT3DaisyDelayHardwareTestRoute
fablabnk
30 × 128.5 mm49 parts2LNo license3125b
motekulo
59 × 75 mm50 parts2LNo license15Daisy Seed POD v1
gfm16617
90 × 60 mm44 parts2LNo license3
How designs wire the Electrosmith_Daisy_Seed_Rev4
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the Electrosmith_Daisy_Seed_Rev4 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3_A pin is tied to 3.3V on 14 of 16 designs.
- The USB_ID pin is left unconnected on 10 of 16 designs (a signal on 6).
- The DAC_OUT2 pin is left unconnected on 10 of 16 designs (a signal on 6).
- The USB_D_- pin is left unconnected on 10 of 16 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| USB_IDpin 1 | Connected to: Not connected 63% · a signal 38% | — |
| SD_DATA_3pin 2 | Connected to: Signal 69% · not connected 31% |
|
| SD_DATA_1pin 4 | Connected to: Signal 63% · not connected 38% |
|
| SD_CMDpin 6 | Connected to: Signal 63% · not connected 38% |
|
| USART1_RXpin 15 | Connected to: Signal 63% · not connected 38% |
|
| AUDIO_IN_1pin 16 | Connected to: A connector 31% · not connected 19% |
|
| AUDIO_OUT_1pin 18 | Connected to: A connector 31% |
|
| AGNDpin 20 | Connected to: GND 94% | — |
| 3V3_Apin 21 | Connected to: 3.3V 88% | — |
| ADC_2pin 24 | Connected to: Signal 81% · not connected 19% |
|
| ADC_3pin 25 | Connected to: Signal 81% · not connected 19% |
|
| DAC_OUT2pin 29 | Connected to: Not connected 63% · a signal 38% | — |
| USB_D_-pin 36 | Connected to: Not connected 63% · a signal 38% | — |
| USB_D_+pin 37 | Connected to: Not connected 63% · a signal 38% | — |
| VINpin 39 | Connected to: 9V 69% · a signal 31% |
|
| DGNDpin 40 | Connected to: GND 94% | — |
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include How to-Make a-Guitar-Pedal by skngh, 125b by motekulo, BluetoothPedal Main by skngh and Seed3-DevKit-Pedal by daisyaudio.
The Electrosmith_Daisy_Seed_Rev4 in open source designs
The gallery holds 19 open source boards using the Electrosmith_Daisy_Seed_Rev4 from 16 GitHub repositories; a typical one measures about 141.9 × 110 mm and carries around 93 components.
79% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is How to-Make a-Guitar-Pedal by skngh.
Parts used alongside the Electrosmith_Daisy_Seed_Rev4
Microcontrollers on boards using the Electrosmith_Daisy_Seed_Rev4
What boards using the Electrosmith_Daisy_Seed_Rev4 are built for
Electrosmith_Daisy_Seed_Rev4: common questions
Where can I find a Electrosmith_Daisy_Seed_Rev4 reference design?
Each of the 19 boards on this page is a real design using the Electrosmith_Daisy_Seed_Rev4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Electrosmith_Daisy_Seed_Rev4 3V3_A pin connected?
The 3V3_A pin is tied to 3.3V on 14 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the Electrosmith_Daisy_Seed_Rev4.
How is the Electrosmith_Daisy_Seed_Rev4 USB_ID pin connected?
The USB_ID pin is left unconnected on 10 of 16 designs (a signal on 6). Counted from the KiCad layouts of 16 open source designs using the Electrosmith_Daisy_Seed_Rev4.
How is the Electrosmith_Daisy_Seed_Rev4 DAC_OUT2 pin connected?
The DAC_OUT2 pin is left unconnected on 10 of 16 designs (a signal on 6). Counted from the KiCad layouts of 16 open source designs using the Electrosmith_Daisy_Seed_Rev4.
What parts are used alongside the Electrosmith_Daisy_Seed_Rev4?
The TL072, CD4051B, H11L1, MCP6004 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the Electrosmith_Daisy_Seed_Rev4 use?
Most are built on ESP32 (1).
How big is a typical board using the Electrosmith_Daisy_Seed_Rev4?
The median is 141.9 × 110 mm, and 79% are two-layer designs.
What is the most popular open source board using the Electrosmith_Daisy_Seed_Rev4?
By GitHub stars, How to-Make a-Guitar-Pedal by skngh, with 50 stars.
Can I simulate one of these boards using the Electrosmith_Daisy_Seed_Rev4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.