HardLabs

AscomGGFLATWIRELESS

giacomolorenzo·ascomGGFLATWIRELESS·KiCad_Project/WirelessFlatPanel.kicad_pcb

AscomGGFLATWIRELESS PCB layout, top view — open source Nordic nRF board by giacomolorenzo

About the AscomGGFLATWIRELESS PCB

AscomGGFLATWIRELESS is an open source Nordic nRF PCB design by giacomolorenzo, published on GitHub under the MIT license. It is a 2-layer board measuring 66.5 × 51.3 mm, with 13 components from 6 distinct parts.

Its main chip is the Adafruit Feather nRF52840 Express, from the Nordic nRF family. By type, the board carries 6 resistors, 4 diodes, 1 module and 1 transistor.

It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.

From the project

I do not charge anything to create and maintain these open-source projects. But if you would like to say "thanks" for this project, feel free to send any amount through Paypal using the button below. I appreciate your support!

I do not charge anything to create and maintain these open-source projects. But if you would like to say "thanks" for this project, feel free to send any amount through Paypal using the button below. I appreciate your support!

Introduction Finished Product User Manual Pre-Requisites Hardware Bill Of Material ASCOM Driver + Downloading And Installing The Driver + Compiling The Driver (For Developers Only) Arduino Firmware + Microcontroller Compatibility + Compiling And Uploading The Firmware Electronic Circuit + Schematics + Breadboard Prototyping + PCB Mechanical Components And Assembly…

AscomGGFLATWIRELESS, from the project README
From the project README

Main components on the AscomGGFLATWIRELESS

Adafruit Feather nRF52840 Express

AscomGGFLATWIRELESS bill of materials (BOM)

13 components, 6 distinct parts.

QtyPartRefs
1
Adafruit Feather nRF52840 Express
A1
1
Val**
Q1
1
10µF
10µF
4
LED
D1, D2, D3, D4
5
330Ω
R1, R2, R3, R4, R5
1
5KΩ
R6

AscomGGFLATWIRELESS design files

The KiCad project lives in the giacomolorenzo/ascomGGFLATWIRELESS repository on GitHub; these links point at the commit this page was built from.

AscomGGFLATWIRELESS: common questions

What microcontroller does the AscomGGFLATWIRELESS use?

The AscomGGFLATWIRELESS is built around the Adafruit Feather nRF52840 Express, from the Nordic nRF family.

How big is the AscomGGFLATWIRELESS PCB?

The AscomGGFLATWIRELESS measures 66.5 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AscomGGFLATWIRELESS?

13 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the AscomGGFLATWIRELESS design files?

From the giacomolorenzo/ascomGGFLATWIRELESS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AscomGGFLATWIRELESS design in my own project?

Yes, under the terms of its MIT license, which giacomolorenzo chose for the repository.

Can I test firmware for the AscomGGFLATWIRELESS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards