VGA-Extender
gianlucarenzi·Vera-Module-RBL-A2·VGA-Extender/VGA-Extender.kicad_pcb
About the VGA-Extender PCB
VGA-Extender is an open source PCB design by gianlucarenzi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 44 × 33.8 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 capacitors.
It belongs with the audio designs in this gallery.
From the project
[WORK IN PROGRESS - NOT WORKING] VERA video/audio slot card for the Apple II with a Slinky-compatible ProDOS RAM disk (ESP32-S3 + iCE40)
The VGA output of the VERA Module RBL-A2, out of the Apple II case.
A small 2-layer board (44.1 × 33.8 mm) with a VGA (HD15 female) connector, to fix on a rear slot bracket of the Apple II. It is linked to the J2 2×8 box header of the VERA Module RBL-A2 with a 16-way IDC ribbon cable: the card itself has no VGA connector, only the header.
The header pins go straight to the VGA pins of the same number (1:1), as on J2 of the card:

VGA-Extender bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_SMD_HEADER_BOX_02X08_HX-JN2.54 CONN_SMD_HEADER_BOX_02x08_HX-JN2.54 | IDC-Header_2x08_P2.54mm_Vertical_SMD | J1 |
| 1 | CONN_SMD_HEADER_BOX_02X08_HX-JN2.54 DS1038-15FBNSiA74-0CC | CONNFLY_DS1038-15FBNSIA74-0CC | J2 |
| 2 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
VGA-Extender design files
The KiCad project lives in the gianlucarenzi/Vera-Module-RBL-A2 repository on GitHub; these links point at the commit this page was built from.
VGA-Extender: common questions
How big is the VGA-Extender PCB?
The VGA-Extender measures 44 × 33.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VGA-Extender?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VGA-Extender design files?
From the gianlucarenzi/Vera-Module-RBL-A2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the VGA-Extender design in my own project?
Yes, under the terms of its GPL-3.0 license, which gianlucarenzi chose for the repository.
More boards in Vera-Module-RBL-A2
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687