VERA MODULE A2
gianlucarenzi·Vera-Module-RBL-A2
About the VERA MODULE A2
VERA MODULE A2 is an open source ESP32 PCB design by gianlucarenzi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 177.8 × 77.3 mm, with 181 components from 63 distinct parts.
Its main chip is the ESP32-S3FN8, from the ESP32 family. Other key parts include the ICE40UP5K-SG48ITR, 74LVC4245APW_118, IC74HC00, C543078 and CD4011B. By type, the board carries 72 resistors, 63 capacitors, 22 ICs, 7 connectors, 5 LEDs and 3 transistors.
It belongs with the audio and usb & debug tools designs in this gallery.
From the project
[WORK IN PROGRESS - NOT WORKING] VERA video/audio slot card for the Apple II with a Slinky-compatible ProDOS RAM disk (ESP32-S3 + iCE40)
Commander X16 graphics and sound, 256 KB of RAM disk, one Apple II slot.
- 🎨 VERA, the Commander X16 video and audio chip, on a Lattice iCE40UP5K FPGA: two layers, 128 sprites, 256 colours from 4096, VGA 640×480, PSG and PCM audio, SD card. - 💾 256 KB of expanded memory compatible with the Apple II Memory Expansion Card ("Slinky"), with a ProDOS slot ROM: ProDOS sees the RAM disk /SLINKY at boot, no driver to load. - ⚡ An ESP32-S3FN8 at 240 MHz runs the slot bus in software: Slinky registers, slot ROM, VERA chip select. - 🔌 USB-C for the ESP32 firmware (CH340C, auto-reset), J6 to write the…

Main components on the VERA MODULE A2
VERA MODULE A2 bill of materials (BOM)
181 components, 63 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40UP5K-SG48ITR | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 4 | 74LVC4245APW_118 | IC_74LVC4245_SOP65P640X110-24N | U3, U4, U6, U19 |
| 1 | IC74HC00 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | ESP32-S3FN8 | IC_ESP32-S3FN8-QFN40P700X700X90-57N | U7 |
| 1 | C543078 74CBTLV3126PW,118 | TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 1 | CD4011B | SOIC-14_3.9x8.7mm_P1.27mm | U9 |
| 1 | W25Q16JVSNIQ | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | WM8524CGEDT | TSSOP-16_4.4x5mm_P0.65mm | U11 |
| 1 | USBCH340C | SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U13 |
| 1 | AMS1117-1.2 | SOT-223-3_TabPin2 | U14 |
| 1 | L7805 | TO-252-2 | U15 |
| 2 | MAX40200AUK | SOT-23-5 | U17, U18 |
| 1 | SN74HCT04DR | SOIC-14_3.9x8.7mm_P1.27mm | U23 |
| 2 | SN74LVC00 | TSSOP-14_4.4x5mm_P0.65mm | U24, U25 |
| 2 | SN74LVC1G07DBVR | SOT-23-5 | U26, U27 |
| 1 | MOSFET-BSS138-SOT-23 | SOT-23 | Q1 |
| 2 | C20069154 BC817,SOT-23 | SOT-23 | Q3, Q4 |
| 1 | OT3EL89CJI-111YLC-25M | OSC_ECS-2033-250-BN | X1 |
| 1 | 40.000MHZ 40.000Mhz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_SMD_HEADER_BOX_02X08_HX-JN2.54 CONN_SMD_HEADER_BOX_02x08_HX-JN2.54 | IDC-Header_2x08_P2.54mm_Vertical_SMD | J1, J2 |
| 1 | CONN_DM3AT-SF-PEJM5 | HRS_DM3AT-SF-PEJM5 | J3 |
| 1 | DX07S016JA1R1500 | JAE_DX07S016JA1R1500 | J4 |
| 1 | PJ-002AH-SMT PJ-002AH-SMT-TR | CUI_PJ-002AH-SMT-TR | J5 |
| 1 | CONN_SMD_01X08_STAGGERED_2.54MM CONN_SMD_01x08_Staggered_2.54mm | PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Right | J6 |
| 1 | PJ-313D | jack_3.5_pj313d-smt | J7 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 2 | SPST2P | SPST-7.3x3.9x2.5-WUERTH-434121025816 | SW1, SW3 |
| 3 | C965822 RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LD1, LD3, LD5 |
| 2 | C2297 GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LD2, LD4 |
| 2 | DIOSCH20V | D_SMC_Handsoldering | D3, D4 |
| 1 | FB0805100R100MHZ800MA FB0805100R100MHZ4A | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | IND0603600R100MHZ300MA IND0603600R100MHZ300mA | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 32 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C9, C10, C11, C12, C14, C16 +24 |
| 14 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6, C7, C8, C25, C30 +6 |
| 6 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C15, C17, C19, C21, C24 |
| 3 | 4.7UF 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C34, C35 |
| 1 | 2.2UF 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 22UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37 |
| 3 | 10UF-20V 10uF-20V | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C45, C48, C51 |
| 1 | 10UF-35V 10uF-35V | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C47 |
| 2 | 27PF 27pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C64, C65 |
| 1 | 2K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 7 | C17477 CREZ08051% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R35, R56, R64, R72, R73, R74 |
| 2 | 50R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 13 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R34, R36, R47, R48, R53, R62 +5 |
| 3 | 4K3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10 |
| 3 | 2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13, R15 |
| 3 | 150R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R16 |
| 3 | 910R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R19, R21 |
| 3 | 160R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R20, R22 |
| 4 | 510R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R25, R27, R57 |
| 3 | 27R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R26, R28 |
| 2 | 820R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30 |
| 4 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31, R33, R59, R60 |
| 2 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R61 |
| 8 | 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37, R38, R39, R40, R41, R42, R43, R44 |
| 4 | 560R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R46, R67, R68 |
| 1 | DNP | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R49 |
| 2 | 5K1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50, R51 |
| 2 | 2K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R52, R55 |
| 1 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R54 |
| 1 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R58 |
VERA MODULE A2 design files
The KiCad project lives in the gianlucarenzi/Vera-Module-RBL-A2 repository on GitHub; these links point at the commit this page was built from.
VERA MODULE A2: common questions
What microcontroller does the VERA MODULE A2 use?
The VERA MODULE A2 is built around the ESP32-S3FN8, from the ESP32 family.
How big is the VERA MODULE A2?
The VERA MODULE A2 measures 177.8 × 77.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VERA MODULE A2?
181 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VERA MODULE A2 design files?
From the gianlucarenzi/Vera-Module-RBL-A2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the VERA MODULE A2 design in my own project?
Yes, under the terms of its GPL-3.0 license, which gianlucarenzi chose for the repository.
Can I test firmware for the VERA MODULE A2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Vera-Module-RBL-A2
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k