HardLabs

Scheda livello serbatoio

giorossi91·livello_serbatoio·schemi/scheda_definitiva/livello_serbatoio_definitiva.kicad_pcb

Scheda livello serbatoio PCB layout, top view — open source AVR/Arduino board by giorossi91

About the Scheda livello serbatoio PCB

Scheda livello serbatoio is an open source AVR/Arduino PCB design by giorossi91, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 83 × 72 mm, with 35 components from 27 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the FT232RL and USBLC6-2SC6. By type, the board carries 9 capacitors, 6 connectors, 6 resistors, 4 jumpers, 3 ICs and 3 diodes.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

This project realizes a simple device to monitor the water level in a tank.

Main components on the Scheda livello serbatoio

FT232RLATmega328P-PUUSBLC6-2SC6

Scheda livello serbatoio bill of materials (BOM)

35 components, 27 distinct parts.

QtyPartRefs
1
FT232RL
U1
1
ATmega328P-PU
U2
1
USBLC6-2SC6
U3
1
16MHz
Y1
1
USB_B
J1
1
CONN_LCD
J3
1
ICSP
J5
1
Exp_Analog_2
J6
1
Exp_Analog
J7
1
Ext_connections
J8
1
MF-MSMF050-2
F1
1
A0J
JP1
1
A1J
JP2
1
A2J
JP3
1
A3J
JP4
1
POT_LCDC
RV1
1
SW_RST
SW1
1
LED_TX
D1
1
LED_RX
D2
1
LED_ON
D4
Show 7 more
QtyPartRefs
6
100nF
C1, C2, C3, C4, C5, C6
2
22pF
C7, C8
1
100uF
C9
2
1k
R3, R4
2
10k
R5, R6
1
330
R8
1
5k
R9

Scheda livello serbatoio design files

The KiCad project lives in the giorossi91/livello_serbatoio repository on GitHub; these links point at the commit this page was built from.

Scheda livello serbatoio: common questions

What microcontroller does the Scheda livello serbatoio use?

The Scheda livello serbatoio is built around the ATmega328P-PU, from the AVR/Arduino family.

How big is the Scheda livello serbatoio PCB?

The Scheda livello serbatoio measures 83 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Scheda livello serbatoio?

35 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Scheda livello serbatoio design files?

From the giorossi91/livello_serbatoio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Scheda livello serbatoio design in my own project?

Yes, under the terms of its GPL-3.0 license, which giorossi91 chose for the repository.

Can I test firmware for the Scheda livello serbatoio without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in livello_serbatoio

Similar boards