Wiggleport

gitter-badger·wiggleport·boards/spine/wiggle-spine.kicad_pcb

Wiggleport PCB layout, top view — open source FPGA board by gitter-badger

About the Wiggleport PCB

Wiggleport is an open source FPGA PCB design by gitter-badger, published on GitHub under the MIT license. It is a 2-layer board measuring 329 × 232.4 mm, with 173 components from 48 distinct parts.

Its main chip is the ICE40-HX1K-TQ144, from the FPGA family. Other key parts include the 93C56, FT2232H, NC7WZ14, SN75176B and RT8299A. By type, the board carries 83 capacitors, 36 resistors, 15 ICs, 9 inductors, 8 diodes and 7 modules.

It belongs with the audio designs in this gallery.

From the project

Modular I/O for multi-channel sound, light, and motion

Modular I/O for multi-channel sound, light, and motion ------------------------------------------------------

Use it to create objects and environments that are perfectly synchronized with immersive sound and vibration Drive up to 14 speakers at 48/96 kHz per channel from one USB port Connect sensors and lights, sync them perfectly with sound and each other Connect other audio-frequency devices like vibration transducers, LED strobes, and modular synthesizers Use all the processing power in your PC, or run from an embedded Linux board like the Raspberry Pi 2 Accurate control of I/O timing…

Wiggleport, from the project README
From the project README

Main components on the Wiggleport

93C56FT2232HNC7WZ14SN75176BICE40-HX1K-TQ144RT8299ASIP32408TCR2EF25TCR2EF12SI5351B2.54mm 2x10 right angle female header

Wiggleport bill of materials (BOM)

173 components, 48 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
93C56
U1
1
FT2232H
U2
3
NC7WZ14
U3, U4, U5
1
SN75176B
U6
1
ICE40-HX1K-TQ144
iCE40-HX1K-TQ144
U7
2
RT8299A
U8, U9
3
SIP32408
SiP32408
U10, U11, U12
1
TCR2EF25
U13
1
TCR2EF12
U14
1
SI5351B
Si5351B
U15
7
2.54mm 2x10 right angle female header
MOD1, MOD2, MOD3, MOD4, MOD5, MOD6, MOD7
3
IRFML8244
Q1, Q2, Q3
1
AOD4189
Q4
1
25.0000 MHz 15ppm 8pF
X1
1
12 MHz
X2
1
5-24V 5A
CON1
1
5-24V 16A
CON2
1
PLR135
CON3
1
PLT133
CON4
1
USB-B
CON5
Show 28 more
QtyPartRefs
1
XLR-3 Female
CON6
1
USB-A
CON7
1
2A PTC
F1
1
10/100baseT transformer
T1
1
TVS DIODE 5.5VWM
D1
4
BAT54 2x common cathode
D2, D3, D5, D6
3
8.5VWM
D4, D7, D8
7
Ferrite bead
FB1, FB2, FB3, FB4, FB5, FB6, FB7
2
22UH
22uH
L1, L2
1
0.1UF
0.1uF
C1
48
0.1UF
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +40
17
10UF
10uF
C10, C13, C15, C17, C20, C27, C35, C48 +9
2
20PF
20pF
C12, C16
2
1NF
1nF
C22, C23
1
1NF
1nF
C29
10
1UF
1uF
C50, C57, C62, C66, C67, C73, C75, C77 +2
2
100PF
100pF
C52, C59
9
10K
10k
R1, R2, R3, R5, R16, R17, R18, R19 +1
4
4.7K
4.7k
R4, R7, R11, R12
4
2.2K
2.2k
R6, R32, R34, R35
2
10
R8, R9
1
12k 1%
R10
4
150
R13, R15, R21, R26
1
1M
R14
7
100K
100k
R20, R24, R25, R29, R30, R31, R33
1
27k 1%
R22
2
5.1k 1%
R23, R28
1
16k 1%
R27

Wiggleport design files

The KiCad project lives in the gitter-badger/wiggleport repository on GitHub; these links point at the commit this page was built from.

Wiggleport: common questions

What microcontroller does the Wiggleport use?

The Wiggleport is built around the ICE40-HX1K-TQ144, from the FPGA family.

How big is the Wiggleport PCB?

The Wiggleport measures 329 × 232.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wiggleport?

173 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wiggleport design files?

From the gitter-badger/wiggleport repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Wiggleport design in my own project?

Yes, under the terms of its MIT license, which gitter-badger chose for the repository.

Can I test firmware for the Wiggleport without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards