7 open source boards using the 93C56
Real designs built with the 93C56, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Wiggleport
gitter-badger
329 × 232.4 mm173 parts2LMIT0Caravel
pohantw
54.5 × 52.1 mm72 parts2LNo license0FPGA
O2 breakout
m-okada
95 × 72 mm101 parts2LNo license3Caravel
efabless
54.5 × 52.1 mm72 parts2LNo license40Caravel
chipfoundry
54.5 × 52.1 mm72 parts2LNo license1Caravel
weyer7
54.5 × 52.1 mm72 parts2LNo license1Caravel
Rimal12345
54.5 × 52.1 mm72 parts2LNo license0
How designs wire the 93C56
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 93C56 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a series resistor on 7 of 7 designs, most often 2 kΩ (then 2.2 kΩ).
- Pin 4 has a pull-up to VDDIO on 7 of 7 designs, most often 10 kΩ.
- Pin 1 has a pull-up to VDDIO on 6 of 7 designs, most often 10 kΩ.
- Pin 6 has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: FT232H 71% |
|
| Pin 2 | Connected to: GND 71% · a signal 29% | — |
| Pin 3 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: FT232H 71% |
|
| Pin 5 | Connected to: FT232H 71% · GND 29% |
|
| Pin 6 | Connected to: VDDIO 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel pcb by efabless, O2 breakout by m-okada, Caravel pcb by chipfoundry and Caravel pcb by weyer7.
The 93C56 in open source designs
The gallery holds 7 open source boards using the 93C56 from 7 GitHub repositories; a typical one measures about 54.5 × 52.1 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Caravel pcb by efabless.
Parts used alongside the 93C56
Microcontrollers on boards using the 93C56
What boards using the 93C56 are built for
93C56: common questions
Where can I find a 93C56 reference design?
Each of the 7 boards on this page is a real design using the 93C56. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 93C56 pin 3?
Pin 3 has a series resistor on 7 of 7 designs, most often 2 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the 93C56.
What pull-up resistor is used on the 93C56 pin 4?
Pin 4 has a pull-up to VDDIO on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the 93C56.
What pull-up resistor is used on the 93C56 pin 1?
Pin 1 has a pull-up to VDDIO on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the 93C56.
What parts are used alongside the 93C56?
The AZ1117CH-1.8TRG1, Caravel, FT232H, NCP1117LPST33T3G and SN74LVC1G125DCKT appear in the most repositories here.
Which microcontrollers do boards using the 93C56 use?
Most are built on FPGA (2).
How big is a typical board using the 93C56?
The median is 54.5 × 52.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the 93C56?
By GitHub stars, Caravel pcb by efabless, with 40 stars.
Can I simulate one of these boards using the 93C56 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.