Thermsupport
glennswest·thermsupport
About the Thermsupport PCB
Thermsupport is an open source PCB design by glennswest, published on GitHub. It is a board, with 22 components from 11 distinct parts.
Other key parts include the RCLAMP1654P.TCT and FT260Q-T. By type, the board carries 10 resistors, 8 capacitors, 2 ICs and 2 connectors.
It belongs with the sensors designs in this gallery.
From the project
A Board to add hvac control to touch panels via i2c or usb
A KiCad electronics design project for a thermal support system featuring multi-channel relay control, sensor interfaces, and USB connectivity.
ThermSupport is a comprehensive thermal management system designed with KiCad EDA software. The system provides:
- Multi-channel relay control - 5 independent relay driver circuits - Sensor interfaces - Temperature and environmental sensor connectivity - USB bridge communication - USB interface for system control and monitoring - Low voltage power supply - Integrated power management - Switch control circuitry - Manual and automated switching…
Main components on the Thermsupport
Thermsupport bill of materials (BOM)
22 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RCLAMP1654P.TCT | SON50P160X160X65-7N | IC1 |
| 1 | FT260Q-T | WQFN-28_FTD | U2 |
| 1 | USB_C_Receptacle | J3 | |
| 1 | GROVE Connector | SEEED_110990030 | J5 |
| 4 | GRM21BR61H475KE51L | CAP_GRM21BR61H106KE43K_MUR | C30, C31, C33, C37 |
| 3 | NMC0402X7R104K50TRPF | CAP_NMC0402_NIC | C32, C34, C38 |
| 1 | C0402C103K5REC7411 | CAPC10555_55N_KEM | C35 |
| 3 | AC0402FR-134K7L | YAG_R0402_YAG | R32, R35, R37 |
| 2 | AC0402FR-7W33RL | YAG_R0402_YAG | R33, R34 |
| 2 | AC0402FR-0710KL | YAG_R0402_YAG | R36, R41 |
| 3 | AC0402FR-135K1L | YAG_R0402_YAG | R38, R39, R40 |
Thermsupport design files
The KiCad project lives in the glennswest/thermsupport repository on GitHub; these links point at the commit this page was built from.
- Schematicbridge.kicad_sch
Thermsupport: common questions
How many components are on the Thermsupport?
22 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Thermsupport design files?
From the glennswest/thermsupport repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Thermsupport design in my own project?
The repository has no license, so all rights stay with glennswest. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956