Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE
gmaxdragon·Seizo-Screen
About the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE PCB
Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE is an open source PCB design by gmaxdragon, published on GitHub. It is a 2-layer board measuring 160 × 120 mm, with 156 components from 64 distinct parts.
Other key parts include the MCP23017-E/SP / 0x20, MCP3202-BI/P, MCP6002-I/P, MCP1525-I/TO and TPS2553DBVR-1 / LATCH OFF. By type, the board carries 73 resistors, 33 capacitors, 14 switches, 13 connectors, 10 ICs and 6 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Seizo Screen is a screen with a bunch of extra features that I find extremely useful for my robotic arm. There are lots of minor issues that are extremely annoying to work around, and this is my solution.
Seizo Screen is a screen with a bunch of extra features that I find extremely useful for my robotic arm. There are lots of minor issues that are extremely annoying to work around, and this is my solution.
I want a screen so I can run direct motor controls without having to connect through my phone and worry about connections. I also wanted more features and wanted to make the whole thing look cooler.

Main components on the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE
Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE bill of materials (BOM)
156 components, 64 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017-E/SP / 0x20 | DIP-28_W7.62mm | U1 |
| 1 | MCP3202-BI/P | DIP-8_W7.62mm | U2 |
| 1 | MCP6002-I/P | DIP-8_W7.62mm | U3 |
| 1 | MCP1525-I/TO | TO-92_Inline_Wide | U4 |
| 1 | TPS2553DBVR-1 / LATCH OFF | SOT-23-6 | U5 |
| 1 | Adafruit 4683 3V3 BUCK | PinHeader_1x04_P2.54mm_Vertical | U6 |
| 3 | SN74LV125AN | DIP-14_W7.62mm | U8, U9, U10 |
| 1 | SN74AHC14N | DIP-14_W7.62mm | U11 |
| 1 | TO HAT J7 / I2C AND IRQ | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | WAVESHARE 16446 / 2.8in TOUCH | PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | AUX 1 / DRY NC ONLY | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | AUX 2 / DRY NC ONLY | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TO HAT J6 / SPI | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | TO HAT J5 / CONTROL | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | 5V IN / FROM HAT J12 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | EXISTING 5V FAN / PASS | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | PROBE + / COMMON GND | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | PROTO 5V / GND | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | LCD ACTUAL VIO / GND TAP | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | HAT J4.3 GPIO6 / J4.4 GPIO7 | PinHeader_1x02_P2.54mm_Vertical | J12 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HAT J10 POWER / 1 GND 2 3V3 | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | MF-RHT050-0 / 500mA HOLD | Fuse_Bourns_MF-RHT050 | F1 |
| 1 | AQY212EH / INPUT DISCONNECT | DIP-4_W7.62mm | K1 |
| 1 | F1 | SW_TH_Tactile_Omron_B3F-100x | SW1 |
| 1 | F2 | SW_TH_Tactile_Omron_B3F-100x | SW2 |
| 1 | F3 | SW_TH_Tactile_Omron_B3F-100x | SW3 |
| 1 | F4 | SW_TH_Tactile_Omron_B3F-100x | SW4 |
| 1 | F5 | SW_TH_Tactile_Omron_B3F-100x | SW5 |
| 1 | F6 | SW_TH_Tactile_Omron_B3F-100x | SW6 |
| 1 | F7 | SW_TH_Tactile_Omron_B3F-100x | SW7 |
| 1 | HOLD REQUEST | SW_TH_Tactile_Omron_B3F-100x | SW8 |
| 1 | I/O RESET ONLY | SW_TH_Tactile_Omron_B3F-100x | SW9 |
| 1 | F8 | SW_TH_Tactile_Omron_B3F-100x | SW10 |
| 1 | F9 | SW_TH_Tactile_Omron_B3F-100x | SW11 |
| 1 | F10 | SW_TH_Tactile_Omron_B3F-100x | SW12 |
| 1 | METER ENABLE | SW_CK_JS202011CQN_DPDT_Straight | SW13 |
| 1 | PROTO 5V OFF / ON (100mA) | SW_CK_JS202011CQN_DPDT_Straight | SW14 |
| 1 | PANEL_3V3 | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | GND | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | SCL | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | SDA | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP4 |
| 1 | IO_RESET | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP5 |
| 1 | LCD_5V | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP6 |
| 1 | 3V3 POWER | LED_D3.0mm | D1 |
| 1 | PROTO FAULT | LED_D3.0mm | D2 |
| 2 | BAT85 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 1 | PROTO POWER | LED_D3.0mm | D5 |
| 26 | 100n | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +18 |
| 3 | 10u / 50V | CP_Radial_D5.0mm_P2.00mm | C15, C17, C30 |
| 2 | 1n | C_Rect_L4.0mm_W2.5mm_P2.50mm | C22, C23 |
| 1 | 4.7u / 50V | CP_Radial_D5.0mm_P2.00mm | C27 |
| 1 | 100u / 16V | CP_Radial_D5.0mm_P2.00mm | C32 |
| 23 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +15 |
| 16 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R12, R13, R14, R15, R16 +8 |
| 3 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R27, R28, R62 |
| 4 | 33 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R32, R33, R34, R63 |
| 10 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R35, R36, R37, R38, R39, R56, R57, R64 +2 |
| 8 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R42, R69, R76, R77, R78, R79, R80, R81 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R43 |
| 3 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R44, R45, R73 |
| 2 | 49.9k / 0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R52, R53 |
| 1 | 10.0k / 0.1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R54 |
| 1 | 330 / 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R59 |
| 1 | 210k / 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R67 |
Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE design files
The KiCad project lives in the gmaxdragon/Seizo-Screen repository on GitHub; these links point at the commit this page was built from.
- Layoutszscreen.kicad_pcb
- Schematicszscreen.kicad_sch
- BOMReal_BOM.csv
Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE: common questions
How big is the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE PCB?
The Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE measures 160 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE?
156 components, from 64 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE design files?
From the gmaxdragon/Seizo-Screen repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Szscreen - CONSOLE LAB 160 x 120 / ENGINEERING PROTOTYPE design in my own project?
The repository has no license, so all rights stay with gmaxdragon. Use it as a reference, and ask the author before reusing the design.
More boards in Seizo-Screen
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979