SEIZO CORE - labeled repair candidate
gmaxdragon·Seizo-Screen·matching-HAT/test1.kicad_pcb
About the SEIZO CORE - labeled repair candidate PCB
SEIZO CORE - labeled repair candidate is an open source ESP32 PCB design by gmaxdragon, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 48 components from 37 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the SN74LVC1G17DBVR. By type, the board carries 20 resistors, 12 connectors, 8 capacitors, 4 ICs, 1 fuse and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Seizo Screen is a screen with a bunch of extra features that I find extremely useful for my robotic arm. There are lots of minor issues that are extremely annoying to work around, and this is my solution.
Seizo Screen is a screen with a bunch of extra features that I find extremely useful for my robotic arm. There are lots of minor issues that are extremely annoying to work around, and this is my solution.
I want a screen so I can run direct motor controls without having to connect through my phone and worry about connections. I also wanted more features and wanted to make the whole thing look cooler.

Main components on the SEIZO CORE - labeled repair candidate
SEIZO CORE - labeled repair candidate bill of materials (BOM)
48 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 | RC2_U2_ESP32_S3_WROOM_1_Thermal030 | U2 |
| 3 | SN74LVC1G17DBVR | SOT-23-5 | U3, U4, U5 |
| 1 | GPIO | Pi_HAT_Stacking_Socket_Checked | J1 |
| 1 | Gripper | RC2_J2_PinHeader_1x03_P2_54mm_Vertical | J2 |
| 1 | Wrist | RC2_J3_PinHeader_1x03_P2_54mm_Vertical | J3 |
| 1 | Conn_01x06 | RC2_J4_PinHeader_1x06_P2_54mm_Vertical | J4 |
| 1 | Conn_01x06 | RC2_J5_PinHeader_1x06_P2_54mm_Vertical | J5 |
| 1 | Conn_01x06 | RC2_J6_PinHeader_1x06_P2_54mm_Vertical | J6 |
| 1 | Conn_01x06 | RC2_J7_PinHeader_1x06_P2_54mm_Vertical | J7 |
| 1 | USB_C_Receptacle_USB2.0_16P | RC2_J8_USB4105_GND_Heel_Clearance | J8 |
| 1 | Screw_Terminal_01x02 | RC2_J9_TerminalBlock_Phoenix_MKDS_1_5_2_5_08_1x02_P5_08mm_Horizontal | J9 |
| 1 | ONBOARD_OLED | RC2_J10_PinSocket_1x04_P2_54mm_Vertical | J10 |
| 1 | REMOTE_SERVO_CABLE | RC2_J11_Servo_Terminal_Silk_Clipped | J11 |
| 1 | PI_FAN | RC2_J12_PinHeader_1x03_P2_54mm_Vertical | J12 |
| 1 | Fuse | RC2_F1_Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | SW_Push | RC2_RESET1_SW_SPST_TL3305A | RESET1 |
| 1 | SW_Push | RC2_SW1_SW_SPST_TL3305A | SW1 |
| 1 | LED | RC2_D1_LED_0805_2012Metric | D1 |
| 1 | 1uF | RC2_C2_C_0805_2012Metric | C2 |
| 1 | 470uF | RC2_C3_CP_Radial_D8_0mm_P3_50mm | C3 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22uF | RC2_C4_C_1206_3216Metric | C4 |
| 1 | 100nF | RC2_C5_C_0805_2012Metric | C5 |
| 1 | 1uF | RC2_C8_C_0805_2012Metric | C8 |
| 3 | 100nF | C_0805_2012Metric | C9, C10, C11 |
| 1 | 10K | RC2_R3_R_0805_2012Metric | R3 |
| 1 | 10k | RC2_R4_R_0805_2012Metric | R4 |
| 1 | 5.1k | RC2_R5_R_0805_2012Metric | R5 |
| 1 | 5.1k | RC2_R6_R_0805_2012Metric | R6 |
| 1 | 22 | RC2_R7_R_0805_2012Metric | R7 |
| 1 | 22 | RC2_R8_R_0805_2012Metric | R8 |
| 1 | 1k | RC2_R9_R_0805_2012Metric | R9 |
| 7 | 100k | R_0805_2012Metric | R11, R16, R17, R20, R21, R22, R23 |
| 1 | 10k | RC2_R12_R_0805_2012Metric | R12 |
| 1 | 10k | RC2_R13_R_0805_2012Metric | R13 |
| 1 | 4.7k | RC2_R14_R_0805_2012Metric | R14 |
| 1 | 4.7k | RC2_R15_R_0805_2012Metric | R15 |
| 2 | 33 | R_0805_2012Metric | R18, R19 |
SEIZO CORE - labeled repair candidate design files
The KiCad project lives in the gmaxdragon/Seizo-Screen repository on GitHub; these links point at the commit this page was built from.
- Layoutmatching-HAT/test1.kicad_pcb
- Schematicmatching-HAT/test1.kicad_sch
- BOMReal_BOM.csv
SEIZO CORE - labeled repair candidate: common questions
What microcontroller does the SEIZO CORE - labeled repair candidate use?
The SEIZO CORE - labeled repair candidate is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the SEIZO CORE - labeled repair candidate PCB?
The SEIZO CORE - labeled repair candidate measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SEIZO CORE - labeled repair candidate?
48 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SEIZO CORE - labeled repair candidate design files?
From the gmaxdragon/Seizo-Screen repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SEIZO CORE - labeled repair candidate design in my own project?
The repository has no license, so all rights stay with gmaxdragon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SEIZO CORE - labeled repair candidate without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Seizo-Screen
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k