Bitclock
goat-hill·bitclock·bitclock-pcb/rev3a/kicad/canary.kicad_pcb
About the Bitclock PCB
Bitclock is an open source ESP32 PCB design by goat-hill, published on GitHub under the MIT license. It is a 4-layer board measuring 78 × 48 mm, with 58 components from 29 distinct parts.
Its main chip is the C2913198, from the ESP32 family. Other key parts include the C2867572, C3659325, C3659421 and C2909890. By type, the board carries 24 capacitors, 12 resistors, 9 diodes, 5 ICs, 4 connectors and 2 switches.
It belongs with the iot & wireless, displays & leds and sensors designs in this gallery.
From the project
An e-ink desk companion
Each directory includes gerber + BOM files used for ordering from a PCBA service like JLCPCB.
Used for ordering from JLCPCB or MacroFab.
https://github.com/goat-hill/kicad-pcba-scripts
It does include a few extraneous components that were an attempt to support the unreleased BMV080 particulate sensor. I may have misinterpreted the preliminary datasheet so feel free to omit that connector and supporting capacitors. It also designs for an option side-USB port that I may omit in the future due to added routing complexity and it is unused.
Main components on the Bitclock
Bitclock bill of materials (BOM)
58 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2867572 TLV76733DRVT | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1 |
| 1 | C2913198 ESP32-S3-WROOM-1-N8 | ESP32-S3-WROOM-1 | U2 |
| 1 | C3659325 SGP41-D-R4 | XDCR_SGP41-D-R4 | U3 |
| 1 | C3659421 SCD40-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U4 |
| 1 | C2909890 SHT40-AD1B-R2 | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 1 | C20917 AO3400A | SOT-23 | Q1 |
| 1 | C324726 FH34SRJ-24S-0.5SH | HRS_FH34SRJ-24S-0.5SH_99_ | J1 |
| 1 | C711417 ECT818001568 | FPC-SMD_ECT818001568 | J2 |
| 1 | TYPE-C16PIN | USB-C-SMD_TYPE-C16PIN | J3 |
| 1 | C3151747 TYPE-C 16PLC-H10.0 | TYPE-C-TH_16PLC-H10.0 | J4 |
| 2 | C318884 SW_Push | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | KT-0603R | LED_0603_1608Metric | D1 |
| 1 | 19-213/Y2C-CQ2R2L/3T(CY) | LED_0603_1608Metric | D2 |
| 4 | C82544 1N5819HW-7-F | D_SOD-123 | D3, D4, D5, D9 |
| 3 | C383211 LESD5D5.0CT1G | D_SOD-523 | D6, D7, D8 |
| 1 | C279861 600mA 10uH ±20% SPH3010H100MT | L_Sunlord_SWPA3010S | L1 |
| 16 | C52923 1µF | C_0402_1005Metric | C1, C2, C9, C11, C12, C13, C14, C15 +8 |
| 1 | C23630 2.2µF | C_0603_1608Metric | C3 |
| 3 | C1525 100nF | C_0402_1005Metric | C4, C8, C19 |
| 2 | C96446 10µF | C_0603_1608Metric | C5, C18 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C32949 10pF | C_0402_1005Metric | C7 |
| 1 | C19666 4.7µF | C_0603_1608Metric | C10 |
| 2 | C25744 10kΩ | R_0402_1005Metric | R1, R12 |
| 1 | 1k | R_0402_1005Metric | R2 |
| 1 | 470R | R_0402_1005Metric | R3 |
| 4 | C25905 5.1kΩ | R_0402_1005Metric | R4, R5, R8, R9 |
| 1 | C158958 470mΩ | R_0402_1005Metric | R6 |
| 1 | C23164 4.7Ω | R_0603_1608Metric | R7 |
| 2 | C17168 0Ω | R_0402_1005Metric | R10, R11 |
Bitclock design files
The KiCad project lives in the goat-hill/bitclock repository on GitHub; these links point at the commit this page was built from.
Bitclock: common questions
What microcontroller does the Bitclock use?
The Bitclock is built around the C2913198, from the ESP32 family.
How big is the Bitclock PCB?
The Bitclock measures 78 × 48 mm, has 4 copper layers and is 1.6462 mm thick.
How many components are on the Bitclock?
58 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bitclock design files?
From the goat-hill/bitclock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bitclock design in my own project?
Yes, under the terms of its MIT license, which goat-hill chose for the repository.
Can I test firmware for the Bitclock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k