GBG
gobabygocarswithjoysticks·gbg-pcb·kicad/gbg-pcb.kicad_pcb
About the GBG PCB
GBG is an open source RP2040/RP2350 PCB design by gobabygocarswithjoysticks, published on GitHub under the MIT license. It is a 2-layer board measuring 91.4 × 62.2 mm, with 62 components from 38 distinct parts.
Its main chip is the SC0918, from the RP2040/RP2350 family. Other key parts include the DRV8245HQPWPRQ1, LMR54410DBVR and TLA2024IRUGR. By type, the board carries 18 connectors, 16 resistors, 8 capacitors, 5 diodes, 4 ICs and 2 transistors.
From the project
A PCB for controlling the motors in a go baby go car with joystick control
https://github.com/gobabygocarswithjoysticks/gbg-pcb
Run this github action when you push changes to the KiCAD files. The action updates the images of the CAD, the gerber files, the schematic, and other PCB production files.

Main components on the GBG
GBG bill of materials (BOM)
62 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8245HQPWPRQ1 | HTSSOP28_PWP_TEX | U1, U2 |
| 1 | LMR54410DBVR | SOT95P280X145-6N | U3 |
| 1 | TLA2024IRUGR | IC_TLA2024IRUGR | U4 |
| 2 | PSMN1R0-40YLDX | LFPAK56 | Q1, Q2 |
| 1 | PH1-12-UA 12 2.54mm pitch header pins | PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | BM04B-SRSS-TB Conn_01x04 | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J2 |
| 1 | TC0403620000G joystick | TC0403620000G | J3 |
| 1 | TB0011-350-03GR speed knob | SAMESKY_TB0011-350-03GR | J4 |
| 1 | TB005-762-02BE | CUI_TB005-762-02BE | J5 |
| 1 | EBBA-02-C-SS-BU screw terminal | EBBA-02-C-SS-BU | J6 |
| 2 | 1017491 | CONN_1017491 | J7, J8 |
| 1 | PH1-10-UA Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J11 |
| 6 | 0197054001 | 0197054001 | J100, J101, J102, J103, J106, J107 |
| 1 | 2159151002 wellye style | CONN02_2159151002_MOL | J104 |
| 1 | 1-1123723-2 wellye style | TE_1-1123723-2 | J105 |
| 1 | SC0918 rpi pico 1 W | RaspberryPi_Pico_Common_SMD | P1 |
| 4 | ASJ-200-B-HT | ASJ200BHT | B1, B2, B3, B4 |
| 2 | 375424B00034G Heatsink | heatsink 375424B00034G | HSL1, HSR1 |
| 1 | EBBA-02-C-SS-BU screw terminal | EBBA-02-C-SS-BU | SW1 |
| 1 | BL-B2141K green | LED_D3.0mm | 3V1 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FS26 D_Schottky | D_SOD-123F | D1, D2 |
| 2 | MMSZ5248B-E3-18 18V zener | D_SOD-123F | D3, D4 |
| 1 | BL-BBX1V4V-2-B02 blue | LED_D5.0mm | D13 |
| 1 | SRR6038-100Y 10uH | IND_SRR6038-120Y | L1 |
| 3 | CGA3E2X7R1H104M080AA 0.1uF | C_0603_1608Metric | C1, C2, C4 |
| 1 | C3216X7R1H105K160AB 1uF | C_1206_3216Metric | C3 |
| 1 | A759KK336M1JAAE036 33uf | CAP_KK-8x8_KEM | C5 |
| 1 | CGA3E2X7R1E104K080AA 0.1uF | C_0603_1608Metric | C6 |
| 1 | GRM188R72A104KA35D 0.1uF | C_0603_1608Metric | C7 |
| 1 | MSASE32MSB7226KPNB25 22uF | C_1210_3225Metric | C8 |
| 2 | CRCW0805220RJNEA 220 | R_0805_2012Metric | R1, R2 |
| 3 | CRCW08053K30FKEA 3.3k | R_0805_2012Metric | R3, R15, R16 |
| 3 | CRCW080522K1FKEA 22.1k | R_0805_2012Metric | R4, R5, R9 |
| 3 | CRCW08058K20JNEA 8.2k | R_0805_2012Metric | R6, R7, R14 |
| 1 | CRCW0805115KFKEA 115k | R_0805_2012Metric | R8 |
| 1 | 742C163472JP 4.7k | 742C163472JP | R10 |
| 2 | CRCW0805604RFKEA 604 | R_0805_2012Metric | R11, R12 |
| 1 | CRCW0805100KFKEA 100k | R_0805_2012Metric | R13 |
GBG design files
The KiCad project lives in the gobabygocarswithjoysticks/gbg-pcb repository on GitHub; these links point at the commit this page was built from.
GBG: common questions
What microcontroller does the GBG use?
The GBG is built around the SC0918, from the RP2040/RP2350 family.
How big is the GBG PCB?
The GBG measures 91.4 × 62.2 mm, has 2 copper layers and is 1 mm thick.
How many components are on the GBG?
62 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GBG design files?
From the gobabygocarswithjoysticks/gbg-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GBG design in my own project?
Yes, under the terms of its MIT license, which gobabygocarswithjoysticks chose for the repository.
Can I test firmware for the GBG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k