6 open source boards using the TLA2024IRUGR

Real designs built with the TLA2024IRUGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TLA2024IRUGR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLA2024IRUGR connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_2 pin is left unconnected on 6 of 6 designs.
  • The VDD_8 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF).
  • The SDA_9 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 3.3 kΩ).
  • The SCL_10 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 3.3 kΩ).
NC_2pin 2Connected to: Not connected 100%
GND_3pin 3Connected to: GND 100%
AIN0_4pin 4Connected to: OPA2333xxDGK 33%
  • Resistor to GND on 33% · 15 kΩ (1)
  • Series capacitor on 33% · 100 nF (1), 10 nF (1)
AIN1_5pin 5Connected to: INA333xxDGK 33%, OPA2333xxDGK 33%
  • Resistor to GND on 50% · 604 Ω (1), 15 kΩ (1)
  • Series resistor on 50% · 324 kΩ (1), 2.1 kΩ (1), 9.1 kΩ (1)
  • Series capacitor on 33% · 100 nF (1), 10 nF (1)
AIN2_6pin 6Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 10 kΩ (3)
  • Resistor to GND on 33% · 8.2 kΩ (1), 15 kΩ (1)
AIN3_7pin 7Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 10 kΩ (3)
  • Resistor to GND on 33% · 604 Ω (1), 15 kΩ (1)
VDD_8pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (5), 2.2 µF (2)
SDA_9pin 9Connected to: A connector 67%, BSS138DW-7-F 33% · not connected 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (2), 3.3 kΩ (1)
SCL_10pin 10Connected to: A connector 67%, BSS138DW-7-F 33% · not connected 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (2), 3.3 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GBG by gobabygocarswithjoysticks, Masters thesis lora gateway compute module cubesat payload pcb by dpmj, Protocentral easyecg hardware by Protocentral and Protocentral easyemg hardware by Protocentral.

The TLA2024IRUGR in open source designs

The gallery holds 6 open source boards using the TLA2024IRUGR from 6 GitHub repositories; a typical one measures about 90.2 × 79.1 mm and carries around 59 components.

83% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is GBG by gobabygocarswithjoysticks.

Microcontrollers on boards using the TLA2024IRUGR

What boards using the TLA2024IRUGR are built for

TLA2024IRUGR: common questions

Where can I find a TLA2024IRUGR reference design?

Each of the 6 boards on this page is a real design using the TLA2024IRUGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLA2024IRUGR NC_2 pin connected?

The NC_2 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLA2024IRUGR.

What decoupling capacitors do designs use on the TLA2024IRUGR VDD_8 pin?

The VDD_8 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the TLA2024IRUGR.

What pull-up resistor is used on the TLA2024IRUGR SDA_9 pin?

The SDA_9 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 6 open source designs using the TLA2024IRUGR.

What parts are used alongside the TLA2024IRUGR?

The AP2112K-3.3, BSS138DW-7-F, INA333xxDGK, OPA2333xxDGK and USBLC6-4SC6 appear in the most repositories here.

Which microcontrollers do boards using the TLA2024IRUGR use?

Most are built on ESP32 (1), Raspberry Pi (1) and RP2040/RP2350 (1).

How big is a typical board using the TLA2024IRUGR?

The median is 90.2 × 79.1 mm, and 83% are two-layer designs.

What is the most popular open source board using the TLA2024IRUGR?

By GitHub stars, GBG by gobabygocarswithjoysticks, with 6 stars.

Can I simulate one of these boards using the TLA2024IRUGR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part