4 open source boards using the LMR54410DBVR
Real designs built with the LMR54410DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SH-ESP32
hatlabs
89 × 58 mm172 parts4LCC-BY-4.049RP2040/RP2350
GBG
gobabygocarswithjoysticks
91.4 × 62.2 mm62 parts2LMIT6STM32
LQRx-InterleavedBuck
Natchpai
100 × 67 mm244 parts4LCERN-OHL-S-2.02ESP32
Tasgdo
nrwiersma
22 × 22.2 mm40 parts4LMIT0
The LMR54410DBVR in open source designs
The gallery holds 4 open source boards using the LMR54410DBVR from 4 GitHub repositories; a typical one measures about 90.2 × 60.1 mm and carries around 117 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is SH-ESP32 by hatlabs.
Microcontrollers on boards using the LMR54410DBVR
What boards using the LMR54410DBVR are built for
LMR54410DBVR: common questions
Where can I find a LMR54410DBVR reference design?
Each of the 4 boards on this page is a real design using the LMR54410DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMR54410DBVR use?
Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the LMR54410DBVR?
The median is 90.2 × 60.1 mm, and 25% are two-layer designs.
What is the most popular open source board using the LMR54410DBVR?
By GitHub stars, SH-ESP32 by hatlabs, with 49 stars.
Can I simulate one of these boards using the LMR54410DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.