Ice40-vga controller
gou-th·ice40-vga-controller·kicad/pcb/vga.kicad_pcb
About the Ice40-vga controller PCB
Ice40-vga controller is an open source FPGA PCB design by gou-th, published on GitHub under the MIT license. It is a 4-layer board measuring 49.3 × 27.6 mm, with 35 components from 11 distinct parts.
Its main chip is the ICE40HX1K-TQ144, from the FPGA family. By type, the board carries 14 capacitors, 6 resistors, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
A custom FPGA VGA controller featuring logic prototyping in Digital, SystemVerilog RTL simulation and a 4-layer PCB designed in KiCad (iCE40)
A custom FPGA-based VGA controller designed for 640×480 @ 60 Hz, implementing VGA timing generation, pixel logic and a 4-layer PCB using the Lattice iCE40HX1K FPGA.
This project implements a minimal yet fully functional VGA video controller without using vendor IP cores. The design follows a complete hardware development flow, starting from logic validation and RTL simulation to a manufacturable multilayer PCB.
Main components on the Ice40-vga controller
Ice40-vga controller bill of materials (BOM)
35 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40HX1K-TQ144 | TQFP-144_20x20mm_P0.5mm | U1 |
| 1 | DE15_VGA_CONNECTOR | DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm | J1 |
| 1 | 01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J_PROG1 |
| 3 | 27k | R_0603_1608Metric | R_B0, R_G0, R_R0 |
| 3 | 13k | R_0603_1608Metric | R_B1, R_G1, R_R1 |
| 3 | 6.8k | R_0603_1608Metric | R_B2, R_G2, R_R2 |
| 3 | 3.3k | R_0603_1608Metric | R_B3, R_G3, R_R3 |
| 7 | 4.7u | C_0805_2012Metric | C1, C4, C5, C7, C9, C11, C13 |
| 7 | 100n | C_0603_1608Metric | C2, C3, C6, C8, C10, C12, C14 |
| 3 | 10k | R_0603_1608Metric | R1, R2, R3 |
| 3 | 100 | R_0603_1608Metric | R4, R5, R6 |
Ice40-vga controller design files
The KiCad project lives in the gou-th/ice40-vga-controller repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/pcb/vga.kicad_pcb
Ice40-vga controller: common questions
What microcontroller does the Ice40-vga controller use?
The Ice40-vga controller is built around the ICE40HX1K-TQ144, from the FPGA family.
How big is the Ice40-vga controller PCB?
The Ice40-vga controller measures 49.3 × 27.6 mm, has 4 copper layers and is 1.36 mm thick.
How many components are on the Ice40-vga controller?
35 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ice40-vga controller design files?
From the gou-th/ice40-vga-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ice40-vga controller design in my own project?
Yes, under the terms of its MIT license, which gou-th chose for the repository.
Can I test firmware for the Ice40-vga controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765