12 open source boards using the ICE40HX1K-TQ144
Real designs built with the ICE40HX1K-TQ144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Icezum
FPGAwars
68.6 × 53.3 mm208 parts4LGPL-3.0356RP2040/RP2350
Pico hx
dan-rodrigues
80.8 × 65.8 mm67 parts4LNo license31FPGA
Saintcon2019TopBoard
compukidmike
148.3 × 147.3 mm1112 parts4LNo license20FPGA
SCAN2000
PatrickBaus
228.6 × 68.6 mm151 parts4LCERN-OHL-W-2.016FPGA
Ice4pi
lightside-instruments
65 × 30 mm52 parts4LTAPR-OHL-1.08STM32
Lane-Detection
TomBazley
125.5 × 77 mm88 parts2LSHL-2.13FPGA
Ice4pi
vlvassilev
65 × 30 mm52 parts4LTAPR-OHL-1.03FPGA
Ice4pi gpib
lightside-instruments
85 × 56 mm94 parts4LTAPR-OHL-1.00FPGA
Ice40-vga controller
gou-th
49.3 × 27.6 mm35 parts4LMIT0FPGA
SaintconMinibadgeDisplay10x10
compukidmike
264.2 × 264.2 mm132 parts2LNo license20FPGA
SaintconMinibadgeHolder8
compukidmike
94 × 61 mm23 parts2LNo license20FPGA
ICE40HX1K-TQ144
zOnlyKroks
89.5 × 66.4 mm81 parts4LCC0-1.00
How designs wire the ICE40HX1K-TQ144
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ICE40HX1K-TQ144 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCIO_2 pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 4.7 µF).
- The CDONE pin has a pull-up to 3.3V on 10 of 10 designs, most often 10 kΩ (then 2.2 kΩ).
- The VCC_SPI pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF).
- The VCCIO_0 pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOL_2Bpin 4 | Connected to: Not connected 60% · a signal 40% | — |
| GNDpin 5, 13, 14, 59, 69, 86, 103, 132, 140 | Connected to: GND 100% | — |
| VCCIO_3pin 6, 30 | Connected to: 3.3V 100% |
|
| IOL_3Apin 7 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_4Bpin 10 | Connected to: Not connected 70% · a signal 30% | — |
| IOL_5Apin 11 | Connected to: Not connected 70% · a signal 30% | — |
| IOL_5Bpin 12 | Connected to: Not connected 80% · a signal 20% | — |
| NCpin 15, 16, 17, 18, 40, 53, 54, 55, 77, 82, 83, 84, 85, 110, 124, 125, 126, 127, 130, 131 | Connected to: Not connected 99% | — |
| IOL_6Apin 19 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_6B_GBIN7pin 20 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_7Bpin 22 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_8Apin 23 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_8Bpin 24 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_9Apin 25 | Connected to: Not connected 60% · a signal 40% | — |
| IOL_9Bpin 26 | Connected to: Not connected 60% · a signal 40% | — |
| VCCpin 27, 51, 92, 111 | Connected to: 1.2V 100% |
|
| IOL_10Apin 28 | Connected to: Not connected 70% · a signal 30% | — |
| IOL_10Bpin 29 | Connected to: Not connected 70% · a signal 30% | — |
| IOL_11Apin 31 | Connected to: Not connected 80% · a signal 20% | — |
| IOL_11Bpin 32 | Connected to: Not connected 80% · a signal 20% | — |
| IOL_12Apin 33 | Connected to: Not connected 70% · a signal 30% | — |
| IOL_12Bpin 34 | Connected to: Not connected 70% · a signal 30% | — |
| GNDPLLpin 35 | Connected to: GND 70% · a signal 30% |
|
| VCCPLLpin 36 | Connected to: Signal 80% · 1.2V 20% |
|
| IOB_29pin 43 | Connected to: Not connected 60% · a signal 40% | — |
| IOB_30pin 44 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_31pin 45 | Connected to: Not connected 70% · a signal 30% | — |
| VCCIO_2pin 46, 57 | Connected to: 3.3V 100% |
|
| IOB_32pin 47 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_33pin 48 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_36_GBIN4pin 50 | Connected to: Not connected 60% · a signal 40% | — |
| IOB_34pin 52 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_37pin 56 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_38pin 58 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_39pin 60 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_40pin 61 | Connected to: Not connected 80% · a signal 20% | — |
| IOB_41pin 62 | Connected to: Not connected 80% · a signal 20% | — |
| IOB_42_CBSEL0pin 63 | Connected to: Not connected 70% · a signal 30% | — |
| IOB_43_CBSEL1pin 64 | Connected to: Not connected 70% · a signal 30% | — |
| CDONEpin 65 | Connected to: A connector 50%, the microcontroller 20% |
|
70 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Icezum by FPGAwars, Pico hx by dan-rodrigues, Saintcon2019TopBoard by compukidmike and SCAN2000 by PatrickBaus.
The ICE40HX1K-TQ144 in open source designs
The gallery holds 12 open source boards using the ICE40HX1K-TQ144 from 10 GitHub repositories; a typical one measures about 87.3 × 63.4 mm and carries around 85 components.
75% use four copper layers or more, and 58% carry an open source license.
The most starred is Icezum by FPGAwars.
Parts used alongside the ICE40HX1K-TQ144
Microcontrollers on boards using the ICE40HX1K-TQ144
What boards using the ICE40HX1K-TQ144 are built for
ICE40HX1K-TQ144: common questions
Where can I find a ICE40HX1K-TQ144 reference design?
Each of the 12 boards on this page is a real design using the ICE40HX1K-TQ144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICE40HX1K-TQ144 VCCIO_2 pin?
The VCCIO_2 pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the ICE40HX1K-TQ144.
What pull-up resistor is used on the ICE40HX1K-TQ144 CDONE pin?
The CDONE pin has a pull-up to 3.3V on 10 of 10 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the ICE40HX1K-TQ144.
What decoupling capacitors do designs use on the ICE40HX1K-TQ144 VCC_SPI pin?
The VCC_SPI pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the ICE40HX1K-TQ144.
What parts are used alongside the ICE40HX1K-TQ144?
The MIC5504-1.2YM5, DSC1001DI1-012.0000 and W25Q32JVSNIQ appear in the most repositories here.
Which microcontrollers do boards using the ICE40HX1K-TQ144 use?
Most are built on FPGA (10), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the ICE40HX1K-TQ144?
The median is 87.3 × 63.4 mm, and 25% are two-layer designs.
What is the most popular open source board using the ICE40HX1K-TQ144?
By GitHub stars, Icezum by FPGAwars, with 356 stars.
Can I simulate one of these boards using the ICE40HX1K-TQ144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.