Ds90c124-deserializer
gregdavill·syzygy-pods·hardware/ds90c124-deserializer/ds90c124-deserializer.kicad_pcb
About the Ds90c124-deserializer PCB
Ds90c124-deserializer is an open source AVR/Arduino PCB design by gregdavill, published on GitHub. It is a 4-layer board measuring 45 × 35 mm, with 53 components from 21 distinct parts.
Its main chip is the ATTINY44A-MMH, from the AVR/Arduino family. Other key parts include the A8603KESTR-R. By type, the board carries 34 resistors, 12 capacitors, 3 diodes, 2 ICs and 2 connectors.
From the project
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
lvds-10.1"-panel - 10.1" 1280x800 LVDS LCD + PMIC ds90c124-deserializer - 1 to 24bit deserialzer sii9022a - HDMI transmitter can - MCP25625 based CAN controller
Main components on the Ds90c124-deserializer
Ds90c124-deserializer bill of materials (BOM)
53 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY44A-MMH ATtiny44A-MMH | QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U1 |
| 1 | A8603KESTR-R DS90C241 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | QTE-020-01-F-D-A SYZYGY-STD | SYZYGY_standard_pod | J1 |
| 1 | Conn_01x02_Male | SB02B-PASK-2 | J4 |
| 2 | BAS5202VH6327XTSA1 LED_ALT | LED_0402_1005Metric | D1, D2 |
| 1 | MBR130T1G LED_ALT | LED_0402_1005Metric | D3 |
| 7 | CL05B104KP5NNNC 0.1uF | C_0402_1005Metric | C1, C3, C5, C6, C7, C9, C14 |
| 1 | CL10A106MP8NNNC 0.01uF | C_0402_1005Metric | C2 |
| 1 | CL05B224KP5NNNC 0.01uF | C_0402_1005Metric | C4 |
| 2 | C2012X5R1V106K125AC 0.01uF | C_0402_1005Metric | C8, C10 |
| 1 | CL05A105KP5NNNC 1uF | C_0402_1005Metric | C15 |
| 1 | RMCF0402FT10K0 10K | R_0402_1005Metric | R1 |
| 1 | RMCF0402FT5K10 47R | R_0402_1005Metric | R2 |
| 1 | RMCF0402FT511 47R | R_0402_1005Metric | R3 |
| 1 | RMCF0402FT100K 47R | R_0402_1005Metric | R4 |
| 1 | RMCF0402FT100R 47R | R_0402_1005Metric | R5 |
| 1 | RC0402FR-071RL 47R | R_0402_1005Metric | R6 |
| 20 | 47R | R_0402_1005Metric | R7, R8, R13, R14, R15, R16, R17, R18 +12 |
| 4 | RMCF0402FT2K20 47R | R_0402_1005Metric | R9, R10, R11, R12 |
| 3 | 1k | R_0402_1005Metric | R31, R32, R33 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | R_0402_1005Metric | R34 |
Ds90c124-deserializer design files
The KiCad project lives in the gregdavill/syzygy-pods repository on GitHub; these links point at the commit this page was built from.
Ds90c124-deserializer: common questions
What microcontroller does the Ds90c124-deserializer use?
The Ds90c124-deserializer is built around the ATTINY44A-MMH, from the AVR/Arduino family.
How big is the Ds90c124-deserializer PCB?
The Ds90c124-deserializer measures 45 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ds90c124-deserializer?
53 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ds90c124-deserializer design files?
From the gregdavill/syzygy-pods repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ds90c124-deserializer design in my own project?
The repository has no license, so all rights stay with gregdavill. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ds90c124-deserializer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in syzygy-pods
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k