SYZYGY LVDS 10.1" LCD Pod
gregdavill·syzygy-pods·hardware/lvds-10.1inch-panel/lvds_10.1inch_panel.kicad_pcb
About the SYZYGY LVDS 10.1" LCD Pod PCB
SYZYGY LVDS 10.1" LCD Pod is an open source AVR/Arduino PCB design by gregdavill, published on GitHub. It is a 4-layer board measuring 45 × 35 mm, with 44 components from 29 distinct parts.
Its main chip is the ATTINY44A-MMH, from the AVR/Arduino family. Other key parts include the A8603KESTR-R, LM3410XMYE/NOPB, PCA9306DCTT and NCP170AMX280TCG. By type, the board carries 18 capacitors, 10 resistors, 5 ICs, 4 diodes, 3 connectors and 2 inductors.
It belongs with the displays & leds designs in this gallery.
From the project
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
lvds-10.1"-panel - 10.1" 1280x800 LVDS LCD + PMIC ds90c124-deserializer - 1 to 24bit deserialzer sii9022a - HDMI transmitter can - MCP25625 based CAN controller
Main components on the SYZYGY LVDS 10.1" LCD Pod
SYZYGY LVDS 10.1" LCD Pod bill of materials (BOM)
44 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY44A-MMH ATtiny44A-MMH | QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U1 |
| 1 | A8603KESTR-R A8603 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U2 |
| 1 | LM3410XMYE/NOPB LM3410 | MSOP-8-1EP_3x3mm_P0.65mm_EP2.54x2.8mm_ThermalVias | U3 |
| 1 | PCA9306DCTT PCA9306 | MSOP-8_3x3mm_P0.65mm | U4 |
| 1 | NCP170AMX280TCG NCP167 | X2SON_4_1.0x1.0mm | U5 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | CSTNE8M00G55Z000R0 8MHz | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | QTE-020-01-F-D-A SYZYGY-STD | SYZYGY_standard_pod | J1 |
| 1 | 40P 0.5MM FFC | FH28E-40S-0.5SH(05) | J2 |
| 1 | JST PA2 | SB02B-PASK-2 | J4 |
| 2 | BAS5202VH6327XTSA1 D_Schottky_ALT | D_SOD-523 | D1, D2 |
| 1 | MBR130T1G D_Schottky_ALT | D_SOD-123 | D3 |
| 1 | MMSZ4705T1G 18V | D_SOD-123 | D4 |
| 1 | SRN3015-2R2M L | L_Taiyo-Yuden_MD-3030 | L1 |
| 1 | LQH5BPB100MT0L L | L_Taiyo-Yuden_MD-5050 | L2 |
| 4 | CL05B104KP5NNNC 100n | C_0402 | C1, C3, C14, C16 |
| 2 | CL10A106MP8NNNC 10uF | C_0603 | C2, C12 |
| 1 | CL05B224KP5NNNC 100n | C_0402 | C4 |
| 2 | CL10B104KB8NNNC 100n | C_0603 | C5, C6 |
| 6 | C2012X5R1V106K125AC 10uF | C_0805 | C7, C8, C9, C10, C11, C13 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL05A105KP5NNNC 1uF | C_0402 | C15, C17 |
| 1 | CL05B104KP5NNNC 100nF | C_0402 | C18 |
| 1 | RMCF0402FT10K0 10K | R_0402 | R1 |
| 1 | RMCF0402FT5K10 5K | R_0402 | R2 |
| 1 | RMCF0402FT511 5K | R_0402 | R3 |
| 1 | RMCF0402FT100K 5K | R_0402 | R4 |
| 1 | RMCF0402FT100R 5K | R_0402 | R5 |
| 1 | RC0402FR-071RL 5K | R_0402 | R6 |
| 4 | RMCF0402FT2K20 2k2 | R_0402 | R9, R10, R11, R12 |
SYZYGY LVDS 10.1" LCD Pod design files
The KiCad project lives in the gregdavill/syzygy-pods repository on GitHub; these links point at the commit this page was built from.
SYZYGY LVDS 10.1" LCD Pod: common questions
What microcontroller does the SYZYGY LVDS 10.1" LCD Pod use?
The SYZYGY LVDS 10.1" LCD Pod is built around the ATTINY44A-MMH, from the AVR/Arduino family.
How big is the SYZYGY LVDS 10.1" LCD Pod PCB?
The SYZYGY LVDS 10.1" LCD Pod measures 45 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SYZYGY LVDS 10.1" LCD Pod?
44 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SYZYGY LVDS 10.1" LCD Pod design files?
From the gregdavill/syzygy-pods repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SYZYGY LVDS 10.1" LCD Pod design in my own project?
The repository has no license, so all rights stay with gregdavill. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SYZYGY LVDS 10.1" LCD Pod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in syzygy-pods
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k