CAN Breakout
gregdavill·syzygy-pods·hardware/can/can.kicad_pcb
About the CAN Breakout
CAN Breakout is an open source AVR/Arduino PCB design by gregdavill, published on GitHub. It is a 4-layer board measuring 45 × 35 mm, with 39 components from 29 distinct parts.
Its main chip is the ATTINY44A-MMH, from the AVR/Arduino family. By type, the board carries 17 resistors, 10 capacitors, 6 diodes, 3 connectors, 2 ICs and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
lvds-10.1"-panel - 10.1" 1280x800 LVDS LCD + PMIC ds90c124-deserializer - 1 to 24bit deserialzer sii9022a - HDMI transmitter can - MCP25625 based CAN controller
Main components on the CAN Breakout
CAN Breakout bill of materials (BOM)
39 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY44A-MMH MCP25625-x-SS | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | ATTINY44A-MMH ATtiny44A-MMH | QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U2 |
| 1 | CSTNE8M00G55Z000R0 CSTCE20M0V13L99-R0 | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | QTE-020-01-F-D-A SYZYGY-STD | SYZYGY_standard_pod | J1 |
| 1 | Conn_01x03_Male | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J2 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | BAS5202VH6327XTSA1 D_Schottky_ALT | D_SOD-523 | D1 |
| 1 | BAS5202VH6327XTSA1 LED_ALT | LED_0402_1005Metric | D2 |
| 1 | MBR130T1G LED_ALT | LED_0402_1005Metric | D3 |
| 1 | MMSZ4705T1G LED_ALT | LED_0402_1005Metric | D4 |
| 2 | D_Zener_x2_KCom_AAK | SOT-23 | D5, D6 |
| 1 | CL05B104KP5NNNC 1uF | C_0402_1005Metric | C1 |
| 4 | CL05B104KP5NNNC 0.1uF | C_0402_1005Metric | C2, C3, C5, C9 |
| 1 | CL05B104KP5NNNC 0.01uF | C_0402_1005Metric | C4 |
| 1 | CL10B104KB8NNNC 47pF | C_0805_2012Metric | C6 |
| 1 | C2012X5R1V106K125AC 47pF | C_0805_2012Metric | C7 |
| 1 | C2012X5R1V106K125AC 4.7nF | C_0402_1005Metric | C8 |
| 1 | CL05A105KP5NNNC 1uF | C_0402_1005Metric | C10 |
| 2 | RMCF0402FT10K0 10k | R_0402_1005Metric | R1, R15 |
| 1 | RMCF0402FT5K10 100k | R_0402_1005Metric | R2 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RMCF0402FT511 100k | R_0402_1005Metric | R3 |
| 1 | RMCF0402FT100K 100k | R_0402_1005Metric | R4 |
| 1 | RMCF0402FT100R 1k | R_0402_1005Metric | R5 |
| 1 | RC0402FR-071RL 1k | R_0402_1005Metric | R6 |
| 2 | 100k | R_0402_1005Metric | R7, R8 |
| 2 | RMCF0402FT2K20 100k | R_0402_1005Metric | R9, R10 |
| 2 | RMCF0402FT2K20 1k | R_0402_1005Metric | R11, R12 |
| 2 | 60.4R | R_0805_2012Metric | R13, R14 |
| 2 | 1k | R_0402_1005Metric | R16, R17 |
CAN Breakout design files
The KiCad project lives in the gregdavill/syzygy-pods repository on GitHub; these links point at the commit this page was built from.
CAN Breakout: common questions
What microcontroller does the CAN Breakout use?
The CAN Breakout is built around the ATTINY44A-MMH, from the AVR/Arduino family.
How big is the CAN Breakout?
The CAN Breakout measures 45 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CAN Breakout?
39 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CAN Breakout design files?
From the gregdavill/syzygy-pods repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CAN Breakout design in my own project?
The repository has no license, so all rights stay with gregdavill. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CAN Breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in syzygy-pods
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k