ECHO-Display
groberts822·ECHO-Display·ECHO_PCB/ECHO.kicad_pcb
About the ECHO-Display PCB
ECHO-Display is an open source ESP32 PCB design by groberts822, published on GitHub. It is a 2-layer board measuring 72.2 × 89.5 mm, with 6 components from 4 distinct parts.
Its main chip is the ESP32 Left, from the ESP32 family. By type, the board carries 3 connectors and 3 switches.
It belongs with the displays & leds designs in this gallery.
From the project
ECHO, or Embedded Controller & Hidden Operations. Music display by day, game console by night.
In addition, my PCB was quite simple, however it took some measurements, where I used the provided STEP files and just measured the necessary sizes in fusion. The 1x7 headers for the ESP32 ARE spaced out correctly (Again, made sure by measuring the part in fusion), and I made sure the display had enough space so it wouldnt cover the switches. I also chose to do the esp32 on the back side, the display ontop, and the switches lined up below the display. I also added mounting holes and added a custom logo to my pcb just for fun (and mounting holes for mounting to case). Below is the PCB:

ECHO-Display bill of materials (BOM)
6 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 Left | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | ESP32 Right | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | TFT | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
ECHO-Display design files
The KiCad project lives in the groberts822/ECHO-Display repository on GitHub; these links point at the commit this page was built from.
- LayoutECHO_PCB/ECHO.kicad_pcb
- SchematicECHO_PCB/ECHO.kicad_sch
- BOMECHO_BOM.csv
ECHO-Display: common questions
What microcontroller does the ECHO-Display use?
The ECHO-Display is built around the ESP32 Left, from the ESP32 family.
How big is the ECHO-Display PCB?
The ECHO-Display measures 72.2 × 89.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECHO-Display?
6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ECHO-Display design files?
From the groberts822/ECHO-Display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ECHO-Display design in my own project?
The repository has no license, so all rights stay with groberts822. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ECHO-Display without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k