Frankfurt eth pic
About the Frankfurt eth pic PCB
Frankfurt eth pic is an open source PIC PCB design by grodansparadis, published on GitHub under the CERN-OHL-1.2 license. It is a 6-layer board measuring 72.1 × 65.5 mm, with 61 components from 39 distinct parts.
Its main chip is the PIC18F26K80, from the PIC family. Other key parts include the ENC28J60-SO, SN65HVD232, LM2575S, 11AA02E48 and MCP23A256. By type, the board carries 19 resistors, 16 capacitors, 8 ICs, 5 LEDs, 3 connectors and 3 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Frankfurt Ethernet to CAN4VSCP bridge
This is an old version of this project that is no longer maintained.
Main components on the Frankfurt eth pic
Frankfurt eth pic bill of materials (BOM)
61 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F26K80 | SO28 | IC1 |
| 1 | ENC28J60-SO | SO28W | IC2 |
| 1 | SN65HVD232 | SO-08 | IC3 |
| 1 | LM2575S | TO263-5 | IC4 |
| 1 | 11AA02E48 | SOT23 | IC5 |
| 1 | MCP23A256 | SO-8 | IC6 |
| 1 | AT45DB041D | SOP8W | IC7 |
| 1 | — | ROHS_SILK | U$1 |
| 1 | 10 MHz | 9C | Q1 |
| 1 | 25 MHz | 9C | Q2 |
| 1 | A00-108-220-450 | RJ-45 | J2 |
| 1 | — | MA06-1 | J3 |
| 1 | — | MA04-1 | J4 |
| 1 | HR911105A | HR911105A | RJ1 |
| 1 | — | B3F-31XX | S1 |
| 1 | 22-23-2021 | 22-23-2021 | TERM0 |
| 4 | — | CHIP-LED0805 | LED1, LED3, LED4, LED5 |
| 1 | Red LED | CHIP-LED0805 | LED2 |
| 2 | 1N5819 | SOD123 | D1, D3 |
| 1 | NUP2105L | SOT23 | D2 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330 uH | DO3316P | L1 |
| 1 | 0.5A 60R | R0805 | L2 |
| 1 | 100uF | PANASONIC_D | C1 |
| 1 | 330uF | PANASONIC_D | C2 |
| 1 | 100nF | 0805 | C3 |
| 2 | 15pF | C0805 | C4, C6 |
| 7 | 0.1uF | C0805 | C5, C7, C9, C12, C13, C16, C23 |
| 1 | 10uF | C0805 | C8 |
| 2 | 18pF | C0805 | C10, C11 |
| 1 | 10 uF | C0805 | C14 |
| 2 | 180 | R0805 | R1, R5 |
| 3 | 10K | R0805 | R2, R4, R7 |
| 5 | 1K | R0805 | R3, R11, R15, R16, R18 |
| 1 | 100K | R0805 | R6 |
| 1 | 2K 1% | R0805 | R8 |
| 4 | 49.9 1% | R0805 | R9, R10, R12, R13 |
| 1 | 100k | M0805 | R14 |
| 1 | 120 | R0805 | R17 |
| 1 | 22K | M0805 | R19 |
Frankfurt eth pic design files
The KiCad project lives in the grodansparadis/can4vscp-frankfurt-eth repository on GitHub; these links point at the commit this page was built from.
Frankfurt eth pic: common questions
What microcontroller does the Frankfurt eth pic use?
The Frankfurt eth pic is built around the PIC18F26K80, from the PIC family.
How big is the Frankfurt eth pic PCB?
The Frankfurt eth pic measures 72.1 × 65.5 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Frankfurt eth pic?
61 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Frankfurt eth pic design files?
From the grodansparadis/can4vscp-frankfurt-eth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Frankfurt eth pic design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which grodansparadis chose for the repository.
Can I test firmware for the Frankfurt eth pic without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in can4vscp-frankfurt-eth
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-MBCTEST
Gekkio
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-CARTPP-DIY
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376