Vscp smart han port interface
grodansparadis·vscp-smart-han-port-interface·kicad/ble-han-port-if.kicad_pcb
About the Vscp smart han port interface PCB
Vscp smart han port interface is an open source ESP32 PCB design by grodansparadis, published on GitHub. It is a 2-layer board measuring 44.5 × 34.5 mm, with 24 components from 16 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the R-78B3.3-1.0 (Recom). By type, the board carries 10 resistors, 8 capacitors, 3 connectors, 2 ICs and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
BLE unit to log P1 data from power meters
BLE/WiFi unit to log P1 data from power meters

Main components on the Vscp smart han port interface
Vscp smart han port interface bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 | ESP-WROOM-02 | U1 |
| 1 | R-78B3.3-1.0 (Recom) | Converter_DCDC_RECOM_R-78B-2.0_THT | U4 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 3 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7 |
| 1 | C_Polarized | PinHeader_1x02_P2.54mm_Vertical | C8 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R7 |
| 1 | 10K | R_0805_2012Metric | R2 |
| 2 | 27R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 2 | 470 | R_0805_2012Metric | R8, R9 |
| 1 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
Vscp smart han port interface design files
The KiCad project lives in the grodansparadis/vscp-smart-han-port-interface repository on GitHub; these links point at the commit this page was built from.
Vscp smart han port interface: common questions
What microcontroller does the Vscp smart han port interface use?
The Vscp smart han port interface is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Vscp smart han port interface PCB?
The Vscp smart han port interface measures 44.5 × 34.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vscp smart han port interface?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vscp smart han port interface design files?
From the grodansparadis/vscp-smart-han-port-interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vscp smart han port interface design in my own project?
The repository has no license, so all rights stay with grodansparadis. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vscp smart han port interface without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k