BLDCControl1.kicad Lolin32Lite sch
gyukiss55·BLDC_Control_Own·KiCad/BLDCControl1.kicad_Lolin32Lite_sch.kicad_pcb
About the BLDCControl1.kicad Lolin32Lite sch PCB
BLDCControl1.kicad Lolin32Lite sch is an open source STM32 PCB design by gyukiss55, published on GitHub. It is a 2-layer board measuring 157.5 × 109.2 mm, with 45 components from 18 distinct parts.
Its main chip is the STM32F411CE_BlackPill, from the STM32 family. Other key parts include the IR2101, L7805, LM339, 4011 and 74LS04. By type, the board carries 16 resistors, 9 ICs, 8 capacitors, 6 transistors, 3 diodes and 2 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
BLDC
- 1.00.00 Add sources - 1.01.00 ESC A,B,C uart control tested - 1.02.00 Win32UARTControl added - 1.03.00 STM32F1033PWMTest, STM32F4xx3PWMTest added
Main components on the BLDCControl1.kicad Lolin32Lite sch
BLDCControl1.kicad Lolin32Lite sch bill of materials (BOM)
45 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IR2101 | DIP-8_W7.62mm | U1, U2, U3 |
| 1 | L7805 | TO-220-3_Vertical | U5 |
| 1 | LM339 | DIP-14_W7.62mm | U6 |
| 2 | 4011 | CERDIP-14_W7.62mm_SideBrazed | U7, U8 |
| 1 | 74LS04 | CERDIP-14_W7.62mm_SideBrazed | U9 |
| 1 | STM32F411CE_BlackPill | DIP-40_W15.24mm | U10 |
| 6 | IRLZ44N | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Conn_Power | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn BLDC | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | ~ | DIP-26_900_WEMOS_LOLIN32_LITE | WemosLolin32Lite1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3 |
| 3 | 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1, C2, C3 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 10uF | CP_Radial_D6.3mm_P2.50mm | C5 |
| 3 | 220uF | CP_Radial_D6.3mm_P2.50mm | C6, C7, C8 |
| 6 | 10R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | 47k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8, R9, R13, R14, R15 |
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11, R12, R16 |
BLDCControl1.kicad Lolin32Lite sch design files
The KiCad project lives in the gyukiss55/BLDC_Control_Own repository on GitHub; these links point at the commit this page was built from.
BLDCControl1.kicad Lolin32Lite sch: common questions
What microcontroller does the BLDCControl1.kicad Lolin32Lite sch use?
The BLDCControl1.kicad Lolin32Lite sch is built around the STM32F411CE_BlackPill, from the STM32 family.
How big is the BLDCControl1.kicad Lolin32Lite sch PCB?
The BLDCControl1.kicad Lolin32Lite sch measures 157.5 × 109.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BLDCControl1.kicad Lolin32Lite sch?
45 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the BLDCControl1.kicad Lolin32Lite sch design files?
From the gyukiss55/BLDC_Control_Own repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BLDCControl1.kicad Lolin32Lite sch design in my own project?
The repository has no license, so all rights stay with gyukiss55. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BLDCControl1.kicad Lolin32Lite sch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in BLDC_Control_Own
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k